Noticeable imperfections on black solder mask of ENIG boards

Have you ever got an ugly uneven solder mask on JLCPCB black panels? In the last order I got this unpleasant surprise where 5 out of 15 black ENIG boards (to be used as front panels) have this noticeable imperfections (see pictures below), as if the coating has thickened unevenly on the surface. It is much more visible in real life than in photos, since the uneven areas reflect light very differently, highlighting the defect.

IMG_20210330_215920.jpg

Other pictures: https://imgur.com/a/TFUSXi8



I sent a quality complaint, they replied apologizing and saying that it's a general problem in the "exposure process" for black boards, and that they will try to find a way to reduce this issue and improve the quality control next time. The other 10 black boards in the same order are fine, like all the ones in my previous order, and it's not nuances: either the solder mask is completely defective, or it isn't at all...

They gave me a partial refund for this time only, but warned me that they can't make sure it won't happen again: I get it, anyway I want to ask how many of you had similar issues, to get an idea of how common it is. Thanks.

#PCB#
PCB
All PNP BJT has low HFE

Dear support
Simulating a simple current limiter I've noticed that the PNP BJT are
simulating with a very low Hfe (around 4) but it should be much higher
For example the 2N3906 should have 100 as Hfe
image.png

Operating Point Simulation results:

V(volprobe3):                 2.524861336995146e+000V       voltage
V(volprobe2):                 1.823509493571086e+000V       voltage
V(volprobe1):                 3.242935620221527e+000V       voltage

Circuit: ** Sheet_1 **

Direct Newton iteration for .op point succeeded.
Semiconductor Device Operating Points:
                        --- Bipolar Transistors ---
Name:       q2          q1
Model:    2n3906      2n3906
Ib:      -1.15e-03    6.41e-13
Ic:       5.71e-03    1.60e-13
Vbe:      7.01e-01    7.18e-01
Vbc:     -7.18e-01   -5.71e-02
Vce:      1.42e+00    7.75e-01
BetaDC:  -4.97e+00    2.49e-01
Gm:      -1.76e-01   -3.51e-12
Rpi:      1.00e+12    1.00e+12
Rx:       2.00e+01    2.00e+01
Ro:       5.67e+00    2.85e+11
Cbe:      8.00e-12    8.01e-12
Cbc:      4.44e-08    4.62e-12
Cjs:      0.00e+00    0.00e+00
BetaAC:  -1.76e+11   -3.51e+00
Cbx:      0.00e+00    0.00e+00
Ft:       6.32e+05    4.24e-02





Date: Tue Apr 06 20:03:23 2021
Total elapsed time: 0.015 seconds.

tnom = 27
temp = 27
method = trap
totiter = 8
traniter = 0
tranpoints = 0
accept = 0
rejected = 0
matrix size = 11
fillins = 4
solver = Normal
Matrix Compiler1: 1.04 KB object code size
Matrix Compiler2: 1.01 KB object code size

Powered by LTspice

#Simulation#
Circuit Design
All PNP BJT has low HFE

Dear All

Simulating a simple current limiter I've noticed that the PNP BJT are simulating with a very low Hfe (around 4) but it should be much higher
For example the 2N3906 should have 100 as Hfe

image.png



Operating Point Simulation results:

V(volprobe3):                 2.524861336995146e+000V       voltage
V(volprobe2):                 1.823509493571086e+000V       voltage
V(volprobe1):                 3.242935620221527e+000V       voltage

Circuit: ** Sheet_1 **

Direct Newton iteration for .op point succeeded.
Semiconductor Device Operating Points:
                        --- Bipolar Transistors ---
Name:       q2          q1
Model:    2n3906      2n3906
Ib:      -1.15e-03    6.41e-13
Ic:       5.71e-03    1.60e-13
Vbe:      7.01e-01    7.18e-01
Vbc:     -7.18e-01   -5.71e-02
Vce:      1.42e+00    7.75e-01
BetaDC:  -4.97e+00    2.49e-01
Gm:      -1.76e-01   -3.51e-12
Rpi:      1.00e+12    1.00e+12
Rx:       2.00e+01    2.00e+01
Ro:       5.67e+00    2.85e+11
Cbe:      8.00e-12    8.01e-12
Cbc:      4.44e-08    4.62e-12
Cjs:      0.00e+00    0.00e+00
BetaAC:  -1.76e+11   -3.51e+00
Cbx:      0.00e+00    0.00e+00
Ft:       6.32e+05    4.24e-02





Date: Tue Apr 06 20:03:23 2021
Total elapsed time: 0.015 seconds.

tnom = 27
temp = 27
method = trap
totiter = 8
traniter = 0
tranpoints = 0
accept = 0
rejected = 0
matrix size = 11
fillins = 4
solver = Normal
Matrix Compiler1: 1.04 KB object code size
Matrix Compiler2: 1.01 KB object code size

Powered by LTspice



Any idea ?

#Simulation#
Circuit Design
Please fix selecting more than one word in posts longer than visible screen height

There are two problems that I have on Android phones.

  1. When posting or replying in the forum, using the blue selection handles, I can select any amount of text anywhere from the start of a post to the last line that is visible on the screen without having to scroll down.

If I have to scroll down the screen to make the text visible then I can only select one word at a time. If it try to select more than one word, as soon as I release the blue selection handle, the whole selection is cleared: no text is highlighted for selection.

2) If I have to scroll down the screen to make the text visible so that I select it or select a point where I want to paste something in or add a new line, then as soon as I touch the screen at that selection point, then the whole screen jumps back to top of the new post and I then have to scroll down again to see the cursor at the editing point in the text.

This behaviour is so bad that I now compose most of my posts in a separate editor (usually as a new email in Gmail because then it is auto -saved in case I make a mistake in the browser buttons: see my other Feature Request about saving partially completed posts: (https://easyeda.com/forum/topic/Please-preserve-incomplete-posts-7e972cc6e84346929126ba01cb3c1996). I then copy and paste my post into the forum but even that is not a good solution because the editor introduces extra unwanted formatting and it also does not handle images well.

  • I do not know if this is because there is a character limit operating or if it is an interaction with the visible screen area.
  • This problem does not exist when posting from a PC in Linux or Windows.

The two videos below show this behaviour (split into two videos because the single video was too big to upload).

Screen_Recording_20210405-145904_001.gif

Screen_Recording_20210405-145904_002_001.gif

#Bug Reports#
Bug Reports