Feature Request
Brief title for your desired feature:
Assign Net and Solid/Cutout/NPTH attributes to an image imported into a copper layer as if it were a Solid Region.
How would you like the feature to work?
If an image is imported into a copper layer, there needs to be at least a Net attribute available to allow the copper representing the image to be assigned to a net so that it could be assigned to a different net from any surrounding copper. Then it will have a clearance set all the way round it.
Another possibly useful attribute would be to be able to assign it a status of Solid, Cutout or NPTH in the same way that can be applied to a Solid Region.
Maybe what should happen is that an imported image is somehow converted to being represented in the PCB editor as a Solid Region?
Why is this feature important to you?
Without the Net attribute, an image imported into a copper layer becomes merged with any other traces or copper areas on that layer.
With the ability to assign a net to the imported image-as-copper, the image can be surrounded by a clearance so that it still visible.
- The Solid/Cutout/NPTH attributes further increase the flexibility of this feature for example making it possible to make PCBs into functional Artworks.
:)
See:
https://easyeda.com/forum/topic/Image_as_copper_zone-ldJDUc6oG
#Feature Requests#BUG
I designed simple PCB to be used as a face plate for a device. It has 4 openings for connectors (rectangular shape). Those openings are defined as NPTH and show up fine in Photo View. They are located on Multi-Layer (disappear only when I hide this layer. I wanted to export this design as pdf file or image, but when I do so, the openings do not show up, only drill holes. This layer is not available for selection when exporting. I tried using Google Chrome browser as well as the desktop version of EasyEDA with the same result - openings don't show up.
Link to PCB: https://easyeda.com/editor#id=58424b9070ef447faf4aa1681c2423a7
#Bug Reports#BUG
Concise problem statement:
I have discovered a couple of problems with LCSC parts C18270 and C31636.
1) They both have 36 pin symbols and 36 pin footprints in EasyEDA.
In LCSC they are shown as:
https://lcsc.com/product-detail/FPC-Connectors_FPC-0-5mmpitch-36P-H2-0mm-Stand-up-style_C31636.html
but the datasheet only lists up to 35 pin:
What do LCSC actually supply? 35P or 36P parts?
In other words, is the link to the datasheet wrong or are the part descriptions, symbols and footprints wrong?
2) It is not clear in english which of the two horizontal mount parts is the part referred to as C18270:
or:
Using Google Translate on the phrase "under the next" I get:
在下一个
so I think C18270 is this one:
but is that true?
Can LCSC clarify this on the webpage?
I get the following error while launching the simulation for my test project https://easyeda.com/editor#id=4a734bb99f6c4755bffacd8c43dc221b:
What do I hav to change to make it work?
Thanks in advance!
Circuit: gooduntitled
Doing analysis at TEMP = 27.000000 and TNOM = 27.000000
Warning: singular matrix: check nodes c1_2 and c1_2
Note: Starting dynamic gmin stepping
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Warning: singular matrix: check nodes c1_2 and c1_2
Warning: Dynamic gmin stepping failed
Note: Starting source stepping
Warning: singular matrix: check nodes c1_2 and c1_2
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful gmin step
Note: One successful source step
Warning: singular matrix: check nodes c1_2 and c1_2
Warning: singular matrix: check nodes c1_2 and c1_2
Warning: source stepping failed
Transient solution failed -
Last Node Voltages
Node Last Voltage Previous Iter
+3v 0 0
c1_1 0 0
u1.5_11 0 0
c1_2 0 0
v1#branch 0 0
doAnalyses: iteration limit reached
tran simulation(s) aborted
Error(parse.c--checkvalid): out: no such vector.
ngspice-26 done