BUG
Concise problem statement:
Wrong information returned for same part when searching using different terms.
Steps to reproduce bug:
Search for
BC547and selectUser symbols.Symbol from middle two entries reported in search wndow as
Footprint/Package: BC547with urls for found symbol/package:
Package reported in search wndow as BC547:
Search for
BC547 TO-92;Symbol from bottom two entries reported in search wndow as
Footprint/Package: SOT23but url for found symbol/package are still:
Package wrongly reported in search wndow as SOT23:
Results:
Expected results:
Browser:
#Bug Reports#Feature Request
We need a way for users to search for:
- schematic symbols that already have spice models;
- spice models so that they can choose a different model for a symbol.
How would you like the feature to work?
- Symbols with spice models need to be easy for the user to identify. A small S in the symbol or the EE sufffix that I use for in house models?
I can create symbols for all the models we have but they still need a way to clearly show that the symbols have spice models attached.
(I can't do this right now because I don't have a list of every model that is in the spice library and the old library interface is no longer available: do you know when you will have an interface to the spice library again?)
- To choose the model for a symbol:
A drop down list like in:
https://easyeda.com/forum/topic/Users_can_choiseinput_a_spice_subckt_or_model_for_a_symbol-64YgasK2W
It must be clear to users if each model is a .model or a .subckt so that they know to change the symbol spice prefix to X for a .subckt. Could that be automatic?)
Why is this feature important to you?
I know you are working on this and that I have asked about this feature before but more users are doing simulation now so the feature is getting more important.
:)
#Feature Requests#Hello,
I have problem with running spice simulation on my circuit:
https://easyeda.com/editor#id=0pjPJDVP7
Error: unknown subckt: xu4 d6_a xu4_2 c8_1 tl082
I have looked for other answers here on the forum, but none helped. I tried and found spice file for the TL082 (http://www.ti.com/product/tl082) but when I added it to the schematic, the spice instead said out of memory ...
Any ideas?
Thank you, Lukas
#Simulation#In:
https://easyeda.com/andyfierman/Tesseract_Guitar_Practice_Amp-MjP71jBni
I created a dual footprint:
C_ALUnTANT_D6n9mm_P1.5-5mm
to allow for the fitting of a range of aluminium or tantalum bead or dipped ceramic capacitors.
It was easy enough to create and I added a track on the bottom layer only of the footprint to connect two of the three pads together to avoid confusion and wrong connections.
The problem is that when running the Design Manager and checking for DRC errors in the PCB, every instance of the footprint generates one track2Track and one track2pad error.
Although there are three holes, the two pads that are connected together are both numbered as pin 2 to avoid any problems with a pin mismatch since all the capacitors that fit onto the footprint obviously only have two pins.
I did try having three pins but the DRC reported exactly the same errors.
This does not stop the creation of valid Gerber files for the board but looks a bit unprofessional since the PCB should have no errors before Gerber generation.
- So, my question is: does anyone know of a better way to create a dual footprint like this that does not generate errors?
Thanks!
#PCB#