EasyEDA has upgraded 1/23

Small update.

The built time is 1/23

Bug fixed

Features

  • Add Ngspice Echo By dillon
  • add Icon for waveform
  • You can hide Curves in wavefrom
    +EasyEDA can remember your wavefrom's config, such as background, width, height and so on. maybe you like White background and blank curves all the way.
#General Discuss#
Others
Add lossy & coupled transmission lines.

Feature Request

From ngspice manual Chapter 6: Transmission Lines.

http://ngspice.sourceforge.net/docs/ngspice-manual.pdf

In order of priority:

6.4 KSPICE Lossy Transmission Lines
6.4.1 Single Lossy Transmission Line (TXL)
6.4.2 Coupled Multiconductor Line (CPL)

These are preferred over the LTRA model because they run faster.

6.2 Lossy Transmission Lines
6.2.1 LTRA model

The LTRA model is a well tried and tested model that spice users will be familiar with.

6.3 Uniform Distributed RC Lines
6.3.1 Uniform Distributed RC Model (URC)

This is mainly of interest to IC designers and is on little use in simulations using discrete components.

http://ngspice.sourceforge.net/docs/ngspice-manual.pdf

Why is this feature important to you?

The lossless transmisson line is very useful but for users who wants to try to simulate a realistic length of cable then the lossless models are essential.

The coupled line CPL model is essential to simulate crosstalk in PCB layouts. It is useful as a real Signal Integrity tool and as an educational tool.

#Feature Requests#
Feature Requests
Transmission line: too many parameters.

BUG

Concise problem statement:

The lossless transmission line does not run in EE.

This explains why.

The ngspice lossless transmission line allows the user to specify

either

Z0 and TD

or

Z0, F and NL.

The EE transmission line specifies Z0, TD and F.

The EE default value for F is 1.

Deleting this value removes F from the list of Custom Attributes in the Properties panel but leaves:

F=

at the end of the parameters list for each instance of a T in the netlist.

The netlist then fails to parse correctly so the simulation fails to start (with no clear error message to the user).

Running the netlist in ngspice.com but with the

F=

parameter for each T instance deleted or commented out, the sim runs OK:

http://www.ngspice.com/index.php?public_circuit=jtvRn7

How to fix this.


The simple way is to remove the F parameter and just have Z0 and TD as the only available parameters however for people doing RF design, the F and NL option may be more helpful.

Maybe access the two options from a dropdown menu in the symbol in left hand panel (like the symbol choices for US/EU for some components)?

For info:


From ngspice manual Chapter 6: Transmission Lines.

http://ngspice.sourceforge.net/docs/ngspice-manual.pdf


Z0 is the characteristic impedance.

The length of the line may be expressed in either of two forms.

The transmission delay, TD, may be specified directly (as TD=10ns,
for example).

Alternatively, a frequency, F, may be given, together with NL, the
normalized electrical length of the transmission line with respect
to the wavelength in the line at the frequency, F.

F is specified in Hz.

If a frequency, F, is specified but NL is omitted, an NL value of
0.25 is assumed (that is, the frequency is assumed to be the
quarter-wave frequency).

Note that although both forms for expressing the line length are
indicated as optional, one of the two must be specified.

Url:

https://easyeda.com/file_view_Transmission-line_aOICUO6oh.htm

Browser:Mozilla/5.0 (Windows NT 5.1; rv:25.0) Gecko/20100101 Firefox/25.0

#Bug Reports#
Bug Reports