How to locate a pin - due to DRC errors. The https://prodocs.easyeda.com/en/symbol/side-panel-right-pin-property/
shows that you can access the 'pin' it from Top Toolbar - Place - Pin or use shortcut "Ait + P
It does not appear in Toolbar and shortcut 'Alt + P' does not work.
Any advice please.

To foster a professional, friendly, and technology-focused community for engineers, all users are expected to follow the rules below when creating posts or replying.
1. Maintain Clarity and Precision in Communication
Use accurate wording and clear logic.
- For technical topics, avoid vague descriptions. For example, instead of “the circuit has an issue”, write* “after powering on, the 5V rail drops to 3.3V, likely due to the regulator overheating”*.
- Provide as much context as possible (e.g., chip model, tool version, waveform screenshots) to help others diagnose the issue.
Use consistent terminology and standard abbreviations.
- For instance, MCU, PCB, FPGA, GND, VCC are acceptable. Avoid creating your own abbreviations.
- If you must use uncommon terminology, include an explanation to prevent misunderstanding.
Maintain a neutral and objective tone.
- Technical discussions should be based on facts and test results, not speculation or emotion.
- Different opinions are welcome, but keep the conversation respectful and constructive.
2. Stay Relevant to the Category
When posting, select the most appropriate category and ensure your content matches the topic.
- Off-topic content will be moved or removed.
- If unsure, post in General Discussion or contact a moderator first.
- Refer to the JLCHUB Community Module Guide for clarification.
3. Prohibited Content (see Community User Policy for details)
The following types of content are strictly forbidden:
Advertising / Promotional content
- Posts promoting Facebook/Whatsapp groups, online shops, or any marketing activity.
- Unapproved product advertisements or external service links.
- Spam or repeated promotional posts.
Harassment / Personal attacks
- Mocking, insulting, or ridiculing others’ opinions or abilities.
- Discriminatory remarks targeting individuals, groups, or professions.
Sensitive / Political topics
- Discussions related to politics, religion, ethnic issues, or social controversies.
- Content involving criminal activities, political positions, or force.
False / Misleading information
- Deliberately spreading incorrect data, or copying projects without attribution.
- Passing off AI-generated or third-party work as original.
4. Enforcement and Moderation
The community is maintained by both the JLC Official Team and volunteer moderators. We reserve the right, without prior notice, to:
- Remove or move inappropriate posts.
- Temporarily suspend accounts for violations.
- Permanently ban accounts for serious offenses.
- Report unlawful activity to authorities if necessary.
5. Use Q&A Posts for Faster Technical Support
If your post is intended to seek solutions, consider using the Q&A format.
- Other users can upvote helpful answers.
- You can mark a reply as the “Best Answer” for community feedback.
- High-quality Q&A posts may be featured or highlighted.
6. Help Us Build a Healthy Community
JLCHUB aims to be a long-term, stable, and professional platform for technical exchange. Every user plays a role in maintaining this ecosystem:
- Use the Report function to flag inappropriate content.
- Share your questions, feedback, or suggestions in JLCHUB.
Make lights dance with sound! This project uses the KY-038 sound sensor module to detect ambient sound/claps/music, and drive an LED (or LED strip) that pulses in time. Perfect for music events, DIY decorations, or adding sound-reactive flair to any setup. Full guide & code on EasyElecModule: KY-038 Sound Sensor Module
Tools & Parts
| Item | Quantity | Notes |
|---|---|---|
| KY-038 sound sensor module | 1 | To detect sound level & threshold |
| Microcontroller board | 1 | e.g., Arduino Uno / Nano / ESP32 |
| LED or LED strip | 1 | RGB or single color, depending on design |
| Resistor(s) | 1–2 | As needed for LED safety (e.g. 220 Ω) |
| Wires / Breadboard | as needed | For prototyping connections |
| USB cable / Power supply | 1 | To power microcontroller & LED strip |
| (Optional) Volume / sensitivity knob | 1 | If you want manual control of threshold |
Difficulty & Time
-
Difficulty: Beginner–Intermediate
-
Estimated Time: ~1 hour (including setup and testing)
Steps
-
Setup the KY-038 with Microcontroller
-
Connect VCC to 5 V (or 3.3 V depending on module).
-
Connect GND to ground.
-
Use the analog output (A0) for measuring sound level or digital output for threshold detection.
-
Connect LED pin (or LED strip data / input) to one of the microcontroller’s digital pins with proper resistor if needed.
-
-
Write Code Sketch
-
Read analog values from the sensor to get sound amplitude.
-
Optionally, use digital output: adjust the KY-038’s onboard potentiometer to set a threshold.
-
Create logic: when sound amplitude (or digital signal) exceeds threshold, turn LED on / pulse /blink; when below, turn off or fade.
-
-
Make LED Pulse or React
-
For pulsing: vary brightness using PWM so that LED brightness changes based on sound level (e.g. louder = brighter).
-
For blinking: turn LED fully on for a short time when the digital signal triggers.
-
If using an LED strip (e.g. addressable), you could have more complex effects (ripple, color change, pattern) triggered by sound bursts.
-
-
Calibrate Sensitivity
-
Use the potentiometer on KY-038 to set the threshold so that ambient noise doesn’t trigger unwanted flashes, but desired sounds do.
-
Test in different environments (quiet room, background music) to fine-tune.
-
-
Enclosure / Mounting (Optional)
-
Mount the sensor module and LED(s) in a project box.
-
Add diffuser if using LEDs so the light is softer.
-
Secure wiring neatly; consider adding on/off switch if required.
-
-
Final Testing & Improvements
-
Run test with various types of sound (clap, speaking, music) to see response.
-
Adjust code delay / hysteresis to avoid flicker or bouncing.
-
Optionally, add features: e.g. adjustable light fade rate, color change with sound intensity, multiple LEDs.
-
What You’ll Learn
-
Interfacing sound sensors with microcontrollers.
-
Using analog vs digital signals.
-
PWM control for variable brightness.
-
Basic signal thresholding and noise handling.
-
Prototyping and calibration techniques.
Links & Resources
-
EasyElecModule’s KY-038 Sensor Overview & Specs – for deeper understanding and buying info.
-
Example code snippets (Arduino) for analog read, digital trigger, PWM output.
-
LED strip libraries if using addressable LEDs (e.g. FastLED, NeoPixel).


