Problems with subckt calls and simulation netlisting
In trying to reply to:
I have created a simplified simulation to clearly demonstrate the issue:
https://easyeda.com/andyfierman/ad823-netlist-problem
This has shown that there are 4 problems with this simulation.
- When first running it there is a fatal error saying that the ADA4700 has missing nodes.

2) Inspecting the netlist shows that no subckt for the ADA4700 has been called from or pulled into the netlist;
3) Inspecting the netlist shows that the subckt for the UA741 has been pulled into the netlist;
4) The statement:
**.inc ADI1.lib **
has been added to the netlist but if the netlist is run in native LTspice, this statement has to be changed to:
**.lib ADI.lib**
before the AD823 model is found.
```
** Sheet_1 **
XU1 IN OUT +5V GND OUT AD823
V1 IN GND SINE(2.5 2.5 1.5MEG)
V445 +5V GND +5V
.SAVE OUT IN
.tran 1.2u
* UA741 OPERATIONAL AMPLIFIER "MACROMODEL" SUBCIRCUIT
* CREATED USING PARTS RELEASE 4.01 ON 07/05/89 AT 09:09
* (REV N/A) SUPPLY VOLTAGE: +/-15V
* CONNECTIONS: NON-INVERTING INPUT
* | INVERTING INPUT
* | | POSITIVE POWER SUPPLY
* | | | NEGATIVE POWER SUPPLY
* | | | | OUTPUT
* | | | | |
.SUBCKT UA741 1 2 3 4 5
*
C1 11 12 4.664E-12
C2 6 7 20.00E-12
DC 5 53 DX
DE 54 5 DX
DLP 90 91 DX
DLN 92 90 DX
DP 4 3 DX
EGND 99 0 POLY(2) (3,0) (4,0) 0 .5 .5
FB 7 99 POLY(5) VB VC VE VLP VLN 0 10.61E6 -10E6 10E6 10E6 -10E6
GA 6 0 11 12 137.7E-6
GCM 0 6 10 99 2.574E-9
IEE 10 4 DC 10.16E-6
HLIM 90 0 VLIM 1K
Q1 11 2 13 QX
Q2 12 1 14 QX
R2 6 9 100.0E3
RC1 3 11 7.957E3
RC2 3 12 7.957E3
RE1 13 10 2.740E3
RE2 14 10 2.740E3
REE 10 99 19.69E6
RO1 8 5 150
RO2 7 99 150
RP 3 4 18.11E3
VB 9 0 DC 0
VC 3 53 DC 2.600
VE 54 4 DC 2.600
VLIM 7 8 DC 0
VLP 91 0 DC 25
VLN 0 92 DC 25
.MODEL DX D(IS=800.0E-18)
.MODEL QX NPN(IS=800.0E-18 BF=62.50)
.ENDS
.inc ADI1.lib
```that
#Bug Reports#
Sign In Or Register Comment after
No comments yet. Be the first to comment!