There have been several posts about the Autorouter not completing routing and getting stuck at some low (sometimes even zero) percent completion.

Someone about 8 months ago reported something similar to this problem and suggested a workaround:

https://easyeda.com/forum/topic/Local-Autorouting-workaround-9af43ebb81b4406ea46e94abf4365a0c

but the problem still appears and since then I had forgotten all about it.

In a topic with someone else recently, I rediscovered this workaround to get the local autorouter to complete but I cannot find the topic this was in.

Anyhow here is the workaround again (edited to clarify run the autorouter rather than start the script):

  1. Run the local autorouter (Route > Autorouter) and then once that has started;
  2. run a second instance of the local autorouter, it will then route the board!

Once it completes you can close the completion message and the warnings about "cannot start another instance of the autorouter..."

Note that this trick does not work when using the cloud autorouter.

  • Please fix this problem with the local autorouter.
#Bug Reports#
#BugReports#
Bug Reports

No comments yet. Be the first to comment!