Wrong Ratlines are shown in PCB Layout (Project: CNC Controller)
Hi,
I've got a problem with routing the PCB. This is my first layout with EasyEDA, I have not much layouting experience, I did one PCB with EAGLE in uni years ago, so please be gentle, I might do something wrong, but I am here to learn :)
My first project might be a little to much to, is not the simplest thing, but I am motivated and hoping to get through.
I'm trying to make a CNC controller on basis of the following project:
https://github.com/bdring/Grbl_Esp32 (Software)
https://github.com/bdring/6-Pack_CNC_Controller (Hardware)
So I made the circuit according to my liking with all the features and connections I need, and everything worked fine.
Next I created a PCB and started to play around there, made a couple attempts, acutally :D...
Anyway, I also played arround with the Auto Router and then I noticed that something in the PCB is not according to the circuit. I updated and imported changes etc, but I keeps showing me wrong connections.
Here on JP2 you can see that Pin 9 is supposed to be the Enable for Stepper 6 (Stpr_6_En).

But in the PCB at the bottom (marked white) you can see that the AutoRouter connected that pin with a couple of others and it thinks it is the Alarm of Stepper 2:


I tried to make the project public, so i guess anyone could access:
https://oshwlab.com/PhilippEBZ/6axis_pk
The circuit screenshot is in 1_outputs and the pcb screenshots are from the PCB file called
PCB_AutoRouter_2021-03-19
Please enlighten me, what I am doing wrong!?
Greetings,
Philipp
Sign In Or Register Comment after
No comments yet. Be the first to comment!