Hi,

I want to place a fiducial in my PCB

I use a round pad with 0.75mm diameter. A solder mask with 0.375mm and a paste mask with -0.375mm

So I have a fiducial with d=0.75 and the solder mask is 2 x d and without paste mask on the pad.

But I have a full copper area on the PCB, and the upper area has a clearance of 0.15mm so the copper area is to close to my fiducial.
How can I remove the copper from the copper area around of 2 x d from my fiducial?copper - soldermask.jpg

You can see in the example.
paste mask= red
soldermask = light green

top_layer.jpg

and here is the top layer my copper area...

Hope you can help me.

thanks in advance

#PCB#
#PCB#
Circuit Design

No comments yet. Be the first to comment!