The correct way to report this error is using the Report Error tool but that is limited to only 256 characters and it is hard to report the error clearly in so few characters. Therefore I have submitted a Bug Report for this symbol (which may apply to others).

In the LCSC library there is a problem with the power pin representation of LCSC part C47994, opa2277PA

The power pins on opa2277PA.1 are OK:
opa2277PA.1 correctly includes power pins.

image.png

but there is a problem with the 'power pins' on the symbols for opa2277PA.2:
opa2277PA.2 shows two pins in the same places as the power pins on opa2277PA.1 but which have no numbers and that are not listed in the 'i' Edit Symbol tool.

image.png

opa2277PA.2 should either:

  1. include power pins exactly as shown on opa2277PA.1 or;
  2. should not show power pins at all.

As opa2277PA.2 is drawn at the moment, users connect power to the un-numbered and unlisted power pins on the symbol with then creates an 'This netlabel is not connected with any pin' warning in the schematic Design Manager for the positive and negative supply pins that is very hard for them to trace and understand as demonstrated like this:

image.png

in this topic:

https://easyeda.com/forum/topic/Netlabel-Problem-9ef1e1c4e4864132ad9ba3fbb0cd0062

#Bug Reports#
#BugReports#
Bug Reports

No comments yet. Be the first to comment!