EasyEDA has a clever scheme whereby placing a VCC or a +5V netflag automatically adds a +5V source to the netlist of the simulation schematic. This means that a voltage source does not have to be explicitly added to a simulation schematic.

What is more, if the name of the a VCC or a +5V netflag is changed to a posiitve or negative voltage value such as 3V, +15V or -12 then a voltage source of that value of is automatically addedto the netlist.

EasyEDA is smart enough to also recognise that if a voltage source of a given value has already been manually placed into the simulation schematic and has a netflag named VCC or the same as the voltage value of that manually placed source, then it does not automatically add a second source of the same parameters to the netlist and so avoids error due to shorted voltage sources.

There is however, a problem that whilst a VCC or a +5V netflag and naming it as an integer voltage value automatically adds a voltage source of that integer value, placing a netflag and giving it a name as a non-integer voltage only creates a net of that name: it does not automatically add a voltage source of that value to the netlist. So, for example, placing a netflag labelled -3 adds a -3V source but labelling it -3.3 only adds a net of that name with no voltage source. Similarly, placing a netflag labelled 12 adds a 12V source but labelling it +2.5V only adds a net of that name with no voltage source.

This is confusing for users.

It needs to work so that placing a VCC or a +5V netflag continues to automatically add a +5V source but placing a VCC or a +5V netflag but with the name changed to any other voltage adds a voltage source to the netlist of that voltage. So for example, adding a VCC or a +5V netflag to a simulation schematic and than changing the name to -3.3 should add a -3.3V voltage source. Similarly, placing a netflag labelled 2.5V should add a +2.5V voltage source.

This project demonstrates the points made above:

https://easyeda.com/andyfierman/the-problems-with-assuming-a-vcc-supply-in-a-simulation

#Bug Reports#
#BugReports#
Bug Reports

No comments yet. Be the first to comment!