Hello all,

Standard browser edition.

I have a schematic with about 130 components. When i convert to pcb the pcb looks ok.

Then when i modify the schematic and update the pcb i have some missing connections.

When i delete the pcb and create another the new pcb looks ok again. But this is no solution, i must place all the components again.

In the first schematic version i had some Net Ports. I deleted and replaced them with wires. But that did not help me with the missing connections. The strange thing is that in the Design Manager Nets list i still have one of the deleted Net Ports (here V1COMMON).

Whats going on with the missing connections M1_J1.5 to R1 and M1_J1.6 to R2 in the pcb?

Thanks for any help.

Patrick

 

Here is the Schematic reduced/simplitied to my problem:

 

Here is the pcb after some updates with the missing connections M1 to resistors R1/R2:

 

This is the Nets list with the strange existing of deleted Net Port "V1Common":

 

After new convertig to PCB it looks ok:

 

#PCB#
#PCB#
Circuit Design

No comments yet. Be the first to comment!