When tryiong to route differential pair, the following DRC error appears:

 
Display
Error Type
Error Object
Rule Name
Object 1
Object 2
Explanation
 
1   Differential Pair Error Track to Track differentialPair Track (DP_1) Track (DN_1) Object 1 to object 2 length tolerance is 0.673mm, should be <=0.254mm

Is it because the distance between the pair at the bottom is too wide? If so, this is the ditance of the pins of the device, not much I can do about it.

What should I do?

Would it make a big difference if I route "regular" routing?

#PCB#
#PCB#
Circuit Design

No comments yet. Be the first to comment!