SMT Pick and Place issue
Hi, I recently placed an order for a PCB with SMT assembly. The BOM and Pick & Place files were generated by EasyEDA. The DFM Analysis shows some components oriented with incorrect rotation and all components mid x mid y appear low and to the left. This has been corrected by JLCPCB but I would like to get it right before uploading my orders in the future. Also, some components have a warning that the Pad to Pad spacing is too large. I chose all components from the LCSC library so cannot understand why this warning appears and if it will have a detrimental effect on my PCB. Any advice would be appreciated. Thanks, John. #GeneralDiscuss#
SMT assembly
Hi, Are all components in the SMT Parts library available to be used in the SMT assembly process? I ask because the library appears to include some through hole components such as these screw terminals which I would like to use https://jlcpcb.com/parts/componentSearch?secondSortUuid=75a76b024c4844bbb1ef3939642081a1&name=Screw%20terminal&firstSortUuid=248c42d1f2d246498d91d5c9cad9dd16 Also, can two of these screw terminals be clipped together to form a bank with 4 poles? Thanks, John #PCB#
Schematic - connection for transistor with 2 collector pins
Hi, I am designing a schematic which will use this transistor https://lcsc.com/product-detail/Darlington-Transistors_Diodes-Incorporated-FZT605TA_C155225.html This transistor has two collector pins, do I have to connect Vcc to both pins in the schematic? EasyEDA says it is an incomplete net with only one pin connected to Vcc. Thanks, John. #Schematic#