asdasdasd
Edge connector creation help
I'm making a PCB to retrofit a vintage HP meter. I have also made other PCB's to fit older instruments. These have all needed PCB edge connectors. EASYEDA doesn't have a tool or simple process to create an edge connector I have found and I have had mixed success making them. My latest effort had all the pins covered with solder mask. My efforts have all been kludges and workarounds. Its obvious from the order process that JLCPCB is set up to make them. I would like some clear straightforward instructions on creating an edge connector. Everything from the PCB outline to creating the pads to properly connect to the netlists to spacing and clearances for the different pad dimentions and adding a chamfer and gold to the connector. #PCB#
1audio 2025-10-25 08:19:20 comment 3 0 Circuit Design
netlist errors when transferring to PCB
I have been having repeating errors where a correction in the schematic is not propagating correctly to the layout. There are pins on the layout with net names that should not be there. In some cases it seems they have more than on net name. I have tried remocving and replacing the part in the schematic. I have checked the schematic carefully. I cannot see how this is happening. Its a simple board with 1 opamp, a handfull of passives and diodes and an edge connector. I'm using the autorouter which doesn't complete even thought it says it has. The missing traces are usually easy direct connections. This is day two of this frustration. I can share the files if that will help. #PCB#
1audio 2025-08-12 08:52:23 comment 17 0 Circuit Design