Clone Board in EasyEDA Pro project.
I love EasyEDA Pro, but one thing I find SOO frustreating is how difficult it seems to be to clone a board. I've read the docs and the Clone command would be perfect, but it doesn't work on my system. When I right click on a Board name and select Clone from the popup menu... It doesn't clone the board and instead I get the following dialog instead. I have no idea what it is trying to do?? What does it want me to Confrm? The docs about Clone do not show this dialog. Often I stumble across a way forward using copy and Paste but today for some reason noting I try is successful to duplicate my Board. So I'm kinda stuck. Does the Clone command actually work? How do others duplicate a Board within an existing project? #PCB#
EasyEDA Pro: All menu and UI controls have bad fonts on macOSX Tahoe
I just updated to macOSX Tahoe 26.2 today and now all the menus and UI controls in Easy EDA Pro are missing font characters. All characters show just a Question Mark inside a smalll box (see screen shot below). This is with EasyEDA Pro 2.2.45.4, which was working fine just before I updated my Apple Silicon MacBook Pro M4 to macOSX Tahoe 26.2 today. All of my other apps are working fine after the update. What can be done to fix this? #Schematic#
Migrating EasyEDA to new laptop Failed/Fix
Hopefully this will save someone else a lot of detective work when migrating Easy EDA to a new computer. I recently migrated my EasyEDA client from one laptop to a new one. The app would seem to start fine but it could not load any of my projects nor even create a new project. The client would seem to startup but all of the panes would remain blank, no warning nor error messages were visible. The issue turned out to be that some (but not all) of the paths to the project and library folders had not been preserved and were blank. I fixed this by going to Settings : Client : Data Path and adding back the missing paths. Now everything works normally again and I can load my current projects. In my specific case I was migrating from an Intel based Mac to an Apple M4 based Mac, so I installed a fresh copy of EasyEDA using the Appple Silicon version of the download. iCloud had properly migrated all of the project and library files and folders to my user account on the new computer but for some reason EasyEDA only saw some of them. Setting the paths again fixed things. So if your EasyEDA installation doesn't work be sure to check the Settings : Client : Data Path pane! I had never needed to look there before and frankly didn't even know it existed... #Others#
Creating a proper fiducial
How do I add a proper fiducial to my EastEDA design so JLCPCB recognizes it? I want to order a stencil with etched through fiducials so I can use it for alignment when I manually apply solder paste to my boards. I see some mention of creating a 1mm round copper area masked for no solder paste. Is that sufficient??? It would seem that JLCPCB needs to know that's a fiducial and not just a round copper area to properly etch it through the stencil. I've seen other suggestions to find an existing footprint for a fiducial but my searches have not turned up anything yet. How do I add a proper fiducial in Easy EDA Pro? #PCB#
Copper pour for reuse blocks
I'd like to have a reuse block included in the copper pour for the ground plane of my main board. I can give the reuse block a copper pour of its own but it ends inside the reuse block's board outline. Rebulding the copper pour of the main board ends outside the reuse block's board outline. How can I join the copper pour of my reuse blocks with the one for the main board in the most reasonable way? Do I really need to apply a "strip of copper fill region" tape across the board outline for each of my five reuse block instances? Any other ideas? #PCB#
Routing from a Reuse Block, Finally!
I finally figured out how to manually route a trace from a reuse block. Set the Routing Mode to Ignore I'd created a reuse block and added five instances to my project and it all worked great except EasyEDA Pro refused to let me route a trace across the board boundary containing each reuse block. If routing starting from a pad within the reuse block the trace would bend and twist at the board outine and refuse to cross it. Similarly if starting the trace outside the reuse block and attempting to enter it the trace would effectively bounce off the board outline and go anywhere but the intended pad on the reuse block. I tried AutoRoute to see if it could do any better and after a very long over night run I found that AutoRoute could route traces to/from the reuse block so I knew it must be possible, even with the reuse blocks I'd created. I finally tried setting the routing mode to ignore and my traces immediately achieved a super power of being able to cross the reuse block board outline!!! Hope this helps others give their reuse blocks similar superpowers. It's worth noting that a DRC error is introduced everytime you use this technique to cross the reuse board outline with a trace. But at least there a way to get the reuse block routed. #PCB#
Reusable PCB layout of two components and interconnections
I want to interconnect two ICs with an optimized PCB layout and then reuse it 5 times in my project. So far I've just made multiple copies of it in the schematic and let the autotrouter make the PCB interconnections. But I'd like to manually optimize the layout but not do it five times and then have to maintain any changes five times too. Do either Modules or Reuse Blocks accomplish this? I've been using EasyEDA standard version and am considering migrating to the Pro version if it has such a feature. I read through both tutorials but it's hard to tell if either is a good fit for this need. A pointer in the right direction is appreciated. #PCB#