STD-PRO migrate: Component 3D models 10x too small
I migrated an online STD design to online PRO (2.2.38). The schematic and board are correct, but the component 3D models somehow have the 'Adjust' attribute at 10%, which makes the 3D view and STEP export have them as 10X too small: So in FreeCAD: Changing all the Adjustments in 3D Model Manager corrects this, but it's a pain... Thanks! #PCB#
EasyEDA Pro - Locale
Yesterday all was fine; today this. Uninstalled and reinstalled newest version (2.2.32.3.1) clean, still: Ideas? Registry values changed? Thanks! **** UPDATE: Restarted PC and all is good. Keeping post in case others see this error too. ***** #Schematic#
Export to DSN - Scaling issue
The export to DSN produces a usable file for Freerouting, but the scale is 10X too small. Whether the EasyEDA canvas is in mm or mil, the export is in mil, with 10x too small boundary and locations. All features (clearance matrix, rules, padstacks, vias, etc) are 10x scaled down too. Note that the \ must meet the following: If the smallest dimension in a design has four digits to the right of the decimal point (such as 0.0001), the must have at least five zeros as the least significant digits (such as 100000). Otherwise, a roundoff error can occur in representing the smallest dimension. For example, a circle with a diameter of 4.2221 has a radius of 2.11105 and requires a fifth decimal place to avoid roundoff. The proportions are all correct in Freerouting, but (for example) default trace width rule of 8mils -> 0.8 mils in FR. Importing the SES file actually re-scales locations back up correctly, but feature sizes keep the 10x downscaling. Also, inner layer conduction areas are not exported. Exporting everything as one component u1 is a little odd, but functionally works if you don't want to move components around. This will be a fantastic feature when DSN / SES export/import works! #BugReports#