asdasdasd
LCSC now demanding tax IDs
I have just tried to place an order but was blocked by a demand for a "tax ID" which private individuals and small businesses do not have and have no use for. Does this mean that LCSC is now only accepting orders from VAT registered corporate customers? I an happy to put my business elsewhere if so, Digikey for instance doesn't create this issue. #Others#
Ajlelectronics 2026-01-10 23:54:51 comment 2 0 Help & Support
The EasyEDAPro app is STILL not working.
I note that the only thing that has happened in a week, is being told to use the online version which I DON'T want to do. Maybe I need to start putting my business elsewhere now, if this is the level of urgency with which they move to sort problems? Maybe the app is deliberately crippled to force us online? That would be a very bad move. #PCB#
Ajlelectronics 2025-12-07 19:44:05 comment 3 0 Circuit Design
Logging in to Desktop client Easy EDA Pro. Full online mode. W10
The age old issue of it refusing to remember login credentials is irritating enough, but over the last few days, it will not allow login at all. I get a popup window wanting user name and password, I change type to avoid the infuriating "click on nonsense", slide to verify and then sign in. At this point it removes the correct password entered and demands a password to be entered. I have been unable to log in now for three days. As I have a W11 laptop too, I did a fresh installation onto that, with exactly the same result. I see that the "not remembering the login" goes back many years, yet it still hasn't been addressed. It can surely only be deliberate in that case. It is highly frustrating. #Others#
Ajlelectronics 2025-11-29 18:52:37 comment 9 1 Others
Login timeout (again).
I am getting very frustrated with the 24 hour expiry on logins for EasyEDA and this forum. It is really not necessary for it to be like this and it puts me off bothering with it, especially when it will not allow the logins to be stored either. That means having to type the login in every time it is used. PLEASE set a sensible login expiry and allow the login to be stored by password managers. #Activity#
Ajlelectronics 2025-05-21 18:01:30 comment 5 0 Activities
V cuts or other separation functions.
This PCB is for two different installations. The first is the rectangular board with the crescent corners and the other is the large, squarer board within it. I would like to make three optional "break off" parts, top and bottom as shown with the yellow line and another vertical cut to the immediate left of the long 40 pin connector. I have looked at V-cut etc but can't see how to specify where I want it. The only work around I can think of is a row of holes to make a weak section, but that is a bit ragged in appearance. Can I draw three lines and ask for them to be V-cut? #PCB#
Ajlelectronics 2025-05-16 03:41:53 comment 6 0 Circuit Design
Brightness of PCB pages
Compare these two separate designs in EasyEDA Pro. The one on the right is far lower in brightness and colour saturation. All settings appear to be the same for both designs and I have been unable to rectify it. #PCB#
Ajlelectronics 2025-05-15 03:14:10 comment 1 0 Circuit Design
EasyEDA Pro, selecting a group of components without others.
Trying to select and move a group of components on a PCB design by drawing a bounding box to select and highlight. When I do this, various other random components outside the bounding box are also picked up and selected, then "move" shifts all of them which is very irritating. How do I prevent this behaviour please? Grouping the required set of components does not alter this behaviour. I want to select a group of components and move only those. #PCB#
Ajlelectronics 2025-05-06 05:12:57 comment 3 0 Circuit Design
Ratline not connected error, but it can't be found
I am about to get a board built but wnen trying to export it, I am getting an error about ratlines not being connected. I have changed the ratline colour to bright yellow and suppressed almost everything else, but still can't see the problem. Log reports 98.88% completed. If it is a clue, I occasionally get the attached error when importing changes. Confirming the change doesn't stop it from reappearing later. I suspect that I have now sorted it. There was an Ethernet socket with an incorrect footprint. It had top layer pads where the holes should have been and so the footprint had more numbers than the symbol. The ratlines error was a red herring. #PCB#
Ajlelectronics 2025-04-24 17:18:47 comment 1 0 Circuit Design
Frustrated with constantly having to log in.
Trying to use EasyEDA Pro is getting more and more frustrating. If it isn't used for a day or two, I have to log in again next time. That wouldn't be so bad if they didn't prevent the login details being captured and stored for easy access. Then we come to the ridiculous Captha nonsense, which is enough to give up completely. "Click on the motorcycles"... There is ONE motorcycle. Do we click every square where there is any part of said motorcycle, or just a line in the middle? Same with buses and then worse; American specific items like fire hydrants and taxis. There really is no reason to treat a PCB program like the Bank of England and certainly no reason to prevent logins being stored. #Others#
Ajlelectronics 2025-04-02 05:09:56 comment 5 0 Others
How can a PCB order and LCSC order be combined into one package for delivery?
I'm sure that I saw a banner advertising the capability a while ago, but now I can't find anything about it. There will be three PCBs and a $50 LCSC order, so it would be helpful if I could save some delivery charges by combining them. #Others#
Ajlelectronics 2025-02-08 19:40:03 comment 3 0 PCB
Autorouting is putting non same net vias into wide tracks. EasyEDA Pro.
This one has me scratching my head. The rectangular outline is 3mm wide and nominated as top layer and Pground and is exposed copper for a screening can to ground to. I have tried hard connecting the track to ground on the 8 pin connector, but still autorouting is putting vias into the Pground track which are from different nets. It is almost as if the rectangular track is invisible to the autorouter. I have also tried making a prohibited layer, but I can't prohibit vias in the options. #PCB#
Ajlelectronics 2025-02-06 23:12:17 comment 2 0 Circuit Design
Making my 3D models available to other users.
I have generated a number of 3D models which I think might be appreciated by others, but have not been able to find a method of adding them to a "public" database. An example below, which is an (early version) audio isolation transformer. #Library#
Ajlelectronics 2025-01-02 22:17:58 comment 5 0 Circuit Design
Changing line width of a PCB before auto routing. EasyEDA Pro version.
I have been struggling with this for a couple of days. It was easy in Standard but it all sems very complex and user unfriendly in Pro, so can't find the option. Lots of terms that I have no idea as to the meaning, like "Net class" and "gloss track". The power rails in my design all need to be made wider for current handling. If I do it manually, it causes DRC errors and changes are wiped out in the next routing session. What I want to do is to click on the whole net for the power rail and change it to .508 throughout. I need it to remain that way through Autorouting. #PCB#
Ajlelectronics 2025-01-02 22:09:55 comment 2 0 Circuit Design