PCI size Rules 5x5cm area or One side has to be greater than 5cm
https://jlcpcb.com/quote/pcbOrderFaq/Gold%20Fingers Im looking at making a PCI board but Rule 2 2. Chamfers are not available on boards smaller than 5x5cm. 5x5cm is the Area, ie could i have a board that ws 2cm x 13cm , the area is greater than 5x5cm I really dont want to talk to JLC as they sucked last time i asked for support #Others#
JLCPCB Problems Uploading
I seem to be getting damaged files when i upload to JLCPCB on Another site its ok and on my Design EasyEDA its ok #Others#
Too Many PCB
Ive got a habbit of Designing a PCB and then coming back to it and going off at the wrong angle so i like to Save each Version 1.0 2.0 etc But now im getting told too Many PCB so HOW many is TOO MANY! #PCB#
Center
ONE Complaint i have about EasyEDA is i am worked off a location 0,0 and then i come to put in another Circule and place it at 0,0 location and the WHOLE Circuit board has MOVED and now i have to PUT every thign BACK and Recalculate what goes where (even made errors and got the PCB made just to find it is OFF key) Not once twice of three times it happens to me .. a LOT and it MOVES the LOT of things, im sure it isnt ME doing this as i would have to SELECT ALL before moving it to get this .. MAYBE just MAYBE a GLITCH in the software But as there is no one to Contact to say any thing (as the Contact US button doesnt seem to Lead any where) id put my NOTE here #PCB#
PCI chamfer
I want to make a PCI board. I did think they where just a PCB that slots in but reading more it has a edge to split the pins a bit and wondering how to do that on EasyEDA #PCB#
BOM Selection
been trying to Pick Parts for the project but doesnt even seem to find them even when its on LCSC and i use their Coding system Driving ME NUTZ im working with SMD and my eye site isnt that good any more to do them so i figured i'd get them made in china but the SYSTEM SUCKS BIG TIME #GeneralDiscuss#
Crazy but seems must do
On my circuits i dont have a bottom Solder Mask, but companies dont like this. So i've had to put a POINTLESS RING that does nothing to the circuit So Suggestion.. well TELLING you (other wise its WEEKS and WEEKS of EMAILS telling them its OK and they wont listen... Put a Pimple or some thing on every layer out the way and not effecting any thing.! #PCB#
Sharing project
I'm trying to work with someone on a PCB design , found them and following , even added their name as manager but it doesn't seem to do any thing I've suggested this site to others in the hope of some project work but looks like it can't do it!! #GeneralDiscuss#
Top Solder Layer
Gerber_TopSolderLayer.GTS I am being Lazy well i dont want to draw a circuit all out again so i just made the Top Solder Layer cover the whole area.. Will that be ok! the area it covers wants to be Solder Layer any how but some of it is Blank and i still put the Solder Layer on it. #PCB#
Top Solder Layer
Gerber_TopSolderLayer.GTS I am being Lazy well i dont want to draw a circuit all out again so i just made the Top Solder Layer cover the whole area.. Will that be ok! the area it covers wants to be Solder Layer any how but some of it is Blank and i still put the Solder Layer on it. #PCB#
Too Complex for EasyEDA!!
i need to draw a 21mm disc with a decoder of 19mm max outer ring means the inner ring is like 5mm (1.5mm thick track [it dont sound right to me, by just need to make one to see if its correct size]) so more need it Converted to GERBER so i can get it made i can draw it off by heart but at the moment its in INKSCAPE in a SVG file format #PCB#
Drawings
I am having problems drawing on your system. I am not keen on the PCB curves when i am trying to get smaller and smoother than a normal PCB I hope this shows, its not to size yet, but should be about 2cm disc i think you guys call it a encoder #PCB#
No Film on Tracks
I need a Circuit that dosnt have the Coating on top of the tracks As i am making a switch and i need the contact to touch the tracks. #PCB#
Tracks
Been trying to link one pad to another and all of a sudden it wont let me #PCB#