asdasdasd
Looking for a smt dc barrel connector 5.5x2.1mm
I am trying to find the above connector so I can have your company solder it fo me. I tried to search your database and couldn’t find one. Thanks! #PCB#
C Jones 2021-06-22 11:59:06 comment 2 0 PCB
Contact creator of part
I plan to use a user created part from the library and would like to contact the creator of the part to ensure that the footprint is accurate for creating a schematic. How can I contact him? #GeneralDiscuss#
C Jones 2020-11-07 14:52:26 comment 3 0 Others
Cannot find footprint to connect to symbol
I created a symbol and a footprint for a smd capacitor. The symbol and footprint were both open and saved. I went to the symbol and tried to do a search on the footprint to connect it to the symbol, but I didn’t have any luck finding the footprint. I then closed easyeda and reopened it and still no luck. Any idea why i couldn’t find the footprint? Thanks #GeneralDiscuss#
C Jones 2020-10-26 12:26:46 comment 1 0 Others
moved a component and a trace appeard at a 45 degree angle that was very long
I tried to move a component and all of a sudden, a trace appeared out of nowhere and at a 45 degree angle and it is very long. why #BugReports#
C Jones 2020-02-29 07:35:43 comment 0 0 Bug Reports
moved a component and a trace appeard at a 45 degree angle that was very long
I tried to move a component and all of a sudden, a trace appeared out of nowhere and at a 45 degree angle and it is very long. why #BugReports#
C Jones 2020-02-29 07:35:42 comment 3 0 Bug Reports
Export pcb name
I was wondering if it would be possible to name the zip file that the images are saved to. The long name generated is not useful and is easy to confuse with other drawings. Also could both images get saved in the same pdf or png or however it was exported? If the top and bottom layer were printed in separate images in the same file, I could send it to straight to the printer and use only one page instead of copying the images to MS Word to print. Thanks Carroll #FeatureRequests#
C Jones 2019-05-24 11:22:45 comment 0 0 Feature Requests
Printing top layer and bottom layer to create my own pcb
I have tried to print the top layer, then bottom layer for etching saving both as pdf and png. Neither one seems to work. The way I do it is I click on export document, separated layer, then check export and mirror on the top layer, then export, Then I do the same thing for the bottom layer and export it. It seems when I line up the top and bottom layer, it doesn't fit right. What am I doing wrong. Thanks #GeneralDiscuss#
C Jones 2019-05-21 10:15:12 comment 6 0 Others
Connecting vias for homemade noard
I am making a homemade double sided pcb and would like to prototype a board before I send it to manufacturing. I thought I would solder a pin through both sides Of a via. Is there a better way? thanks #GeneralDiscuss#
C Jones 2019-05-14 03:24:56 comment 4 0 Others
Board outline is filled in red, not a pink outline
I have a pcb that I lost the outline on. I'm not sure how, but there it is. I clicked on boardoutline to make it the active layer and created a rectange around my pcb. It came out filled in red instead of the outline being in pink. Can you tell me what I did wrong? Thanks #PCB#
C Jones 2019-05-13 23:52:58 comment 1 0 Circuit Design
create a part in two layers
I Hi, I want to create a part that can be soldered on both sides. I would like to create two rectangles for soldering the tabs circled in red on the bottom. How do I create two rectangle solder pads to solder to? Thanks . #PCB#
C Jones 2019-05-08 00:09:17 comment 12 0 Circuit Design
photograph in forum
I would like to post a photograph in the forum to show what I am trying to do. Is there a way to do this? Thanks #GeneralDiscuss#
C Jones 2019-05-06 18:49:53 comment 3 0 Others
looking for a vertical usb-a connector
I am looking for a usb connector that can be mounted on a pcb vertically. I want to plug a 5 volt wall wart into a wall socket, then plug a pcb with a male USB adapter into the wall wart and have the board stand up to save room on the outlet. I would like ears on the usb so I can solder them to the board for more stability. Does someone have a part number for me to be able to order and design on a pcb? Thanks #GeneralDiscuss#
C Jones 2019-04-30 02:11:32 comment 14 0 Others
How to get a part from the internet into my library/
I found a part that I would like to incorporate into my design. I have searched all over the internet, but evidently don't know how to ask the right question in the search bar. Can anyone help me get this part into my library? Thanks. https://easyeda.com/editor#id=!1631e215ac0743849c0dbeb8f58691c8 #GeneralDiscuss#
C Jones 2019-03-23 11:51:17 comment 3 0 Others
3 pin header
This is my first foray into circuit design using Easyeda. I am trying to find a 3 pin header in the parts that you would plug a servo into. What is the name for the part? Thanks #GeneralDiscuss#
C Jones 2019-03-23 01:34:01 comment 3 0 Others