asdasdasd
Login chaptca is pretty annoying
I was just logging in and the login chaptca asked me 8 or more times to pick images, and the images was very poor quality. Also it was very difficult to know, if a tiny part of a tire is part of a motorcycle, so it kept on asking. Am I the only one to find the chaptca annoying. #Others#
Henrik Larsen 2024-05-07 14:02:25 comment 3 0 Others
Components excluded from BOM should automatically be excluded from pickandplace file also
I wonder if the subject in the headline is true, but I would benefit from having a pickandplace file that match the BOM exactly. I have optional components designed into the PCB, and as optinal I have excluded those from the BOM. Still all components on the PCB/Schematic are exported to pickandplace file. I guess it could be optional, with a third checkbox in the dialogue for exporting pickandplace, with the text "[ ] Exclude components not in BOM" What do others have to say here. #FeatureRequests#
Henrik Larsen 2021-12-17 20:22:56 comment 0 0 Feature Requests
Subfolders disappear
We are two developers, having weird behaviour using "New Subfolder" in our All projects view. We both can create a subfolder fine, it appears, but then after a few seconds it disappear. If we create a project in the new subfolder, it also disappear from our view. What are we doing wrong. #BugReports#
Henrik Larsen 2021-12-14 17:30:33 comment 0 0 Bug Reports
PCB 3D export generates errors in OBJ file
Hi, The export of PCB as 3D obj file, does not generate correct obj fileformat. I export this PCB (section of PCB shown) And get this. Some of the problems I mention here, but there are many other small obscure errors in the output: The USB connector at top of the piggyback has a long pointy thing going backwards. The 8 Molex plug in the foreground is completely messed up on the pins side. The DIP switch is weirdly cut off and one corner and the front is invalidated. The piggyback PCB is hollow, ie. the sides are not shown. The obj file is beyond repair with these errors. I guess this happens in the export, as the imported components all look perfect in their source format, and the EasyEDA 3D view of the PCB is also perfect. While you are at it, please export the material file as well. Thanks #BugReports#
Henrik Larsen 2021-03-25 22:09:22 comment 1 0 Bug Reports
Schematic capture delete node dont work
Hi, In Schematic capture, I cannot get "delete node" to work. After clicking a segment and right click a node and click delete node, nothing happens. I have tried in several different situations, and never got it to work in version 6.4.17. #BugReports#
Henrik Larsen 2021-03-20 20:44:25 comment 3 0 Bug Reports
Edit points dialog bug
The Edit Points dialog is buggy. This dialog dont work for the simplest thing. I have this situation, and when I try to edit the Y value selected above, so the hole gets inside the PAD, I get the error: Ok, I understand that, but why are my values being rejected, when I actually try to fix the values so the hole gets inside. Instead I then try to edit the last leg of the polygon to make it a square, but... And my values are not reflected in the drawing of polygon. So the value is again rejected and not updated internally. What gives ? One of the basics of UI development, in particular developing dialoges, is that the data in the dialog, should NOT be tested while editing the values of the dialog. The values in the dialog should be tested when you press OK, and if a problem with the values exist, the dialog should present the problem and remain open. I'm stunned this passed through any testing ! Actually the quality of EasyEDA is getting worse every time i get back to use it. I started using EasyEDA about 3 years ago, and while more nice features have been added, the overall quality has decreased dramatically. #BugReports#
Henrik Larsen 2021-02-08 22:29:17 comment 0 0 Bug Reports
Help creating pad's without soldermask on Pad's via
HI, I can't seem to get around this. I'm trying to create a footprint for a PCB Edge connector kind of thing on a 4 layer PCB. The connector should allow for either a push on PCB edge connector, or to solder wires directly to the PCB. So, I create a number of square pads, and want each connector to have connection to innder layers. But I also want to prevent the vias from attracting solder, so solder does not flow into the holes, if the edge connector is soldered by hand or machine. I found out how to create PADs with offset hole, but still the entire pad is having a soldermask. So, I cant find a solution for this. I have read elsewhere on this forum, many suggestions, but no real answer to this. Many suggestions in the forum, suggest the oppsite, to add a soldermask manually. This is not the solution, as I vant to remove the soldermask, but only on the Via's. It is important that any suggestions are multilayer compatible. #PCB#
Henrik Larsen 2021-02-08 16:32:04 comment 9 0 Circuit Design
Problems with library
Hi, I have serious problems with the library today. My intention was to clone and edit an existing footprint. I had this footprint that I cloed to create a different width. So I added '0.1"', excluding single quotes but including terminating double quote. From then on everything went wrong. If the library cannot handle some special characters, the user interface should block these characters or at least return an error to the user. After having cloned this footprint with the invalid name, I could not work properly with the library anymore. Searches on similar names does not update the results, deleting the footprint with the invalid name says its deleted, but it sticks there. Cloning the invalid footprint to a new footprint with a valid name, does not appear after saving it. I cant tell you how much trouble I ahve had after this. I cannot get rid of the invalid footprint and I cannot create new footprints with a name that looks like the new footprint. Please fix your library and the UI. The private invalid library footprint is 'SIL-4 PCB EDGE 0.1"', excluding single quotes. #BugReports#
Henrik Larsen 2021-02-05 19:45:28 comment 5 0 Bug Reports
Design manager Components list improvement
Hi, I would like to be able to see "Prefix (component name)" in the components lists in Design Manager while Schematic is in view. Currently I see "Prefix (Footprint)" while having the Schematic open ? Why not show both, like: "Prefix (Component name, Footprint)" Thanks. #FeatureRequests#
Henrik Larsen 2020-11-27 20:27:57 comment 0 0 Feature Requests
Accept DRC errors and/or convert these to warnings
HI, I would like to be able to convert DRC errors to warnings. If often need to connect a net to some input pin, but dont need it to be really thick as that nets tracks mostly need to be. It could be 24V DC. Its annoying to have to specify a net to be to thin, to have the danger of not making most tracks for that net wide enough. Using the Autorouter requires me to set the "worst case" width of the net. On the other side, I also want to be able to route a thin track for that net to some low current sensing input, where width is not important. So if I could just accept the DRC errors for this Segment and this Via and say its okay. So in future, these DRC errors are shown as yellow warnings, just to let me know they are there. Or maybe there is already a fantastic workaround for this, I dont know of ? /Thanks. #FeatureRequests#
Henrik Larsen 2020-11-25 22:06:15 comment 4 0 Feature Requests
DRC errors after switching from mm to mils
Hi, I just switched from mm to mils in my PCB layout, and now get hundreds of Via Diameter DRC errors. I'm pretty sure, I didn't set the required Via Diameter to be 24.016mils in the first place. The Via Diameter was originally specified to be 24 mils, and the Via is actually still 24 mils. It seems there's a rounding error in converting the DRC rules data, when switching the PCB from mm to mils. I would recommend to create DRC rules in both mm and mils, when defining them. So changing measuring unit, would not recalculate forth and back with resulting rounding errors. The entered value is set as specified, the alternative is calculated, and not calculated again, even when switching measuring unit, unless the value is later entered in the alternative measuring unit, in which case the first valus is then calculated. #BugReports#
Henrik Larsen 2020-11-19 16:53:55 comment 1 0 Bug Reports
Editing version name is not automatically reflected in open project or project manager
Hi, Sometimes I choose that my version name is not correct and therefore change the name of the version of a project. When exiting the version management page, then "Opened Projects" does not show the new name. Also when opening the project manager (open project) the new version name is also not there. #BugReports#
Henrik Larsen 2020-11-18 17:12:28 comment 0 0 Bug Reports
Autorouter dont attempt routing when setting "skip routed nets" checkbox
I have this mostly finished PCB where I import a few changes and then ask the autorouter to finish routing the changes only. I set the "skip routed nets" checkbox, and press Run, and get this answer: I don't know what Via is set, no changes was made to the PCB: My expectations was that the attempted count was equal to the count of ratslines at least. #BugReports#
Henrik Larsen 2020-09-29 16:32:58 comment 0 0 Bug Reports
PCB Color selection during rendering
Could we have more control over PCB color selection in the 2D and 3D rendering. The yellow is way off, from a real yellow PCB, which is darker and more to the brown side. But both 2D and 3D renderings in yellow are ridicoulous brigt, making it really hard to see the white silkscreen. We use the 2D/3D renderings in the review process, and have a hard time when i get to use the yellow PCB color. #FeatureRequests#
Henrik Larsen 2020-09-28 19:24:24 comment 0 0 Feature Requests
Layers and objects extremely annoying
Hi, May I suggest that the "Layers and Objects" dialog could open from the top, rather than from the bottom. It has distressed me from day one, that it opens from the bottom, and collapses to the bottom, on mouse over. I use extra mouse movements 99% of the times I have to use that really annoying dialogue. Also, if you make it stay open by clicking the pin, and pull it to fill some blank area under the attributes area while "All" is active, then it still collapses some, when you select other groups, like "Copper". Why ? It's so much out of normal UX ! #FeatureRequests#
Henrik Larsen 2020-09-28 14:53:08 comment 7 0 Feature Requests
How do I add multiple items in BOM for single part footprint
Hi, I want to add at 3 pin PCB header and a single 2 pin jumper ala those inside PC's on the motherboard. The schematic is simple, its just a 3 pin connector or so, and the footprint is a 3 pin 100 mills header. But I want the Jumper part to be added to the BOM as well, so that it is surely purchased with all the components for the PCB, as it is vital for the PCB to work. I have searched near and far in the forums but havn't found anything so far. #Skill#
Henrik Larsen 2020-09-24 22:17:59 comment 3 0 Circuit Design
Design rule checking on schematic hangs
When clicking update icon on "DRC Errors" in Deisgn manager while in Schematic mode, the popup appear, but dont show any progress. Is this the expected bahaviour ? #BugReports#
Henrik Larsen 2020-09-24 21:26:20 comment 5 0 Bug Reports
Autorouter creates DRC errors when routing
HI, I have updated to latest autorouter (7.x) after having been away from EasyEDA for some time. Now, when I Autoroute (Local) my PCB, the router finishes ok, but the DRC error check leaves me with nearly 100 DRC errors. I have many "Via Diameter" errors since the autorouter do not use the Via Diameter from the Design rules of the routed track. Manu "Via Drill Diameter" errors for the same reason. Many many "Clearance" errors , since the autorouter ignores the routed tracks clearance settings when routing. Is this the expected behaviour with router V7.x ? #BugReports#
Henrik Larsen 2020-09-24 17:48:04 comment 23 0 Bug Reports
Left and right panels are limited in width
The side panels are limiteed in width, obstructing labels text. As shown below, it not possible to get the full text of Manufaturer... what ever. There are not even tooltip popup for the text. For experienced users this may not be a problem, but this is not good for new users. #BugReports#
Henrik Larsen 2020-09-23 19:08:05 comment 2 0 Bug Reports
Cannot change font attributes on net labels in schematic
Hi, It seems that I can change font family and font size on any type of item in schematic, except on net label's. Is this true ? #BugReports#
Henrik Larsen 2020-05-15 05:44:53 comment 4 0 Bug Reports
BOM window is really small for the amount of information it hold
Hi, Is there a really good reason the BOM export preview display is so small. If not, could we have it resizable or just larger, to better view the component details before exporting. #FeatureRequests#
Henrik Larsen 2020-01-27 20:17:09 comment 0 0 Feature Requests
Project versions are sorted strangely
The project version management page does not sort versions sensibly. I would prefer to sort by version name or creation date. #BugReports#
Henrik Larsen 2019-12-11 17:41:08 comment 0 0 Bug Reports
Version management page does not show which project you are managing
While editing version information, I cannot verify which project i pressed manage version on. To verify this: On any project, rightclick and open version and click on "version management" menu item. On the page you see, you cannot see the project name anywhere. I know you can click on the project icon and switch forth and back between pages on the project, but It would be really nice to be able to see project name on the title of the window. #BugReports#
Henrik Larsen 2019-12-11 17:37:28 comment 0 0 Bug Reports
Autorouter 8.11 uses wrong via dimensions
Autorouter version 8.11 routes some traces with wrong dimensions. This version of the Autorouter do finish autorouting, even if the track width does not fit the PADs for those components the track doesn't fit on to. In DRC rules you can define different track widths where each of those can be defined with different sizes of VIA's also. But the Autorouter do not respect the Via settings for the DRC it is routing. In the special track settings on the autorouter setup page, you can use only one setting for VIA dimensions. This causes problems, as the VIA settings should vary for different track vidths, but doesn't after auto routing, #PCB#
Henrik Larsen 2019-11-02 18:13:25 comment 0 0 Circuit Design
Autorouter 8.10 stops with failed connections when component pads are smaller than design roule for network.
One thing is that the Auto router stops with failed onnections, but it fails also other connections to affected components, where those connections are not breaking design rules due to thickness. May i suggest that the Autorouter routes as far as it can, and leaves the final bit sitting loose, for the user to fix those connections, and the autorouter still try finish routing as much as possible. I would rather have a fully routed board with some connections missing near the affected components, instead as the now sometimes very incompletely routed board. See image below. U2 is not routed, even if some connections could have been finished. Also the fat lines could have been routed to the very area quite near the connection destination. Finally look at the blue line between d2 and u2. It has been curled somehow by the autorouter. Very strange. #PCB#
Henrik Larsen 2019-11-02 02:07:59 comment 5 0 Circuit Design
Autorouter do not respect no connect flag
The Auto router fails to avoid pins where the Schematic has that pin marked with "no connect flag". The effect is that traces and vias are placed so they cut through those pins on the PCB. As far as I'm aware, schematic design requires all pins to be connected or have no connect flag. But, even if a pin is marked with no connect, it still may have signals. But, I also need to stop the Auto routerin its works, because it cannot finish my design. I get Auto router timeout on my design, but I also get these errors constantly. Simplex.cutout_from: division line is null Simplex.calc_division_lines: division not found Simplex.cutout_from: division line is null Simplex.calc_division_lines: division not found So I cannot say exactly which error is the culprit here... Using auto router version 0.8.1 Please make some work on the auto router. #BugReports#
Henrik Larsen 2019-10-29 23:32:41 comment 1 0 Bug Reports
Create texts with project name, project version etc.
It would be nice to be able to create texts on PCB where project name\, username\, version\, date etc. can be automatically updated. Ex. ${project_name} ${project_version} by ${user_initials} on ${date_dd-mm-yyyy} #FeatureRequests#
Henrik Larsen 2019-09-10 15:54:34 comment 2 0 Feature Requests
Autorouter seems to get stuck on clearance problems
Hi, I have noticed several times that the Autorouter cannot finish routing a PCB, when clearance settings are in conflict with footprint distances vs. specified track width. Autorouter just dont fiish and get stuck on the last few pads not being routed. Ex. A PWR net is specified to be 60mil, and PCB is laid out with SMD components. Then some tracks just wont fit the SMD pads. Then the Autorouter will hang on these. Usually the small SMD components just need a thinner track, since they are usually low current components. I would like the Autorouter to finish laying out even if there are clearance problems, or alternatively let me specify the the track from PWR net to this particular component is valid for a thinner track. #PCB#
Henrik Larsen 2019-09-02 20:28:12 comment 2 0 Circuit Design
Project version confusion with multiple users
Hi, I have a problem with project versions and confusion related to multiple users. When user1 is working with, lets say, an older board to find defects, and so open a project and switches to this older version of a project, it immediately affects user2 also, even though he hasn't switch version himself. If user2 then opens a sheet in the same project, he gets the sheet from the old version and not the version he think he would get, according to his preferrred version. This would be a source for many unexplained errors with this system. Regards. #BugReports#
Henrik Larsen 2019-06-13 16:38:26 comment 5 0 Bug Reports
Autorouter needs "Select nets" instead of "Skip nets"
The Autorouter works quite well, but sometimes I need to let the Autorouter route some nets first. For example, this could be nets with high currents I want to prioritize to get shortest path. This is where it becomes a hassle to use the Autorouter. If I want to route some specific nets first, I have to pick all other nets to skip these. Using the UI in the "Skip Nets" dialog pane to do this, is a pain. Please come up with something more user friendly. What about listing all nets sorted by name and grouped by design rules, each net and group with a checkbox, The entire list, each group or each net could be checked or unchecked, so to let the user select or deselect at will. Default would be all to be selected. This would replace the quickly implemented dropdown picking dialog, This would be a UI fix only, the parameter set for the autorouter would be unchanged I guess, But I have also seen the Autorouter go faulty when "skip nets" is heavily used to route specific nets before others. It seems to loose some nets, even if they are not in the skipped list. #PCB#
Henrik Larsen 2019-05-31 23:37:56 comment 3 0 Circuit Design