asdasdasd
Two pads with the same X/Y/WIDTH/HEIGHT parameters can have slightly different appearances.
BUG Concise problem statement: Two pads with the same X/Y/WIDTH/HEIGHT parameters can have slightly different appearances. The error is recorded in the EasyEDA raw data. "PAD~RECT~4011.42~2990.24~1.41732~6.89~1~~ASH2~0.001~4010.711 2986.799 4012.129 2986.799 4012.129 2993.689 4010.711 2993.689~0~gge67~0~~Y" "PAD~RECT~4011.43~2990.24~1.41732~6.89~2~~BSH1~0.001~4010.752 2986.75 4012.17 2986.75 4012.17 2993.64 4010.752 2993.64~0~gge97~0~~Y" Steps to reproduce bug: Create a pad on the top layer. Make a copy of the pad. Change the layer of the copied pad from top to bottom. Set the X/Y coordinates of the copied pad to be identical. Results: Pads do not overlap 100%. Expected results: Pads should overlap 100%. Browser: Chrome #BugReports#
IBNobody 2017-03-23 05:54:48 comment 0 0 Bug Reports
Selecting objects on visible layers via the lasso box also selects objects on hidden layers
BUG Concise problem statement: Selecting objects on visible layers via the lasso box also selects objects on hidden layers Steps to reproduce bug: Place a pad on the top layer. Place a pad on the bottom layer. Hide the top layer. Drag the mouse cursor lasso over the area where both pads are. The bottom layer pad appears selected. Drag the bottom layer pad. Unhide the top layer. The top layer pad has moved. Results: Objects on hidden layers can be selected and moved. Expected results: If a layer is hidden, objects on it should not be selectable / movable. Browser: Chrome, Latest #BugReports#
IBNobody 2016-12-07 04:47:46 comment 4 0 Bug Reports
Turn Off Object Types
Feature Request Brief title for your desired feature: Turn Off Object Types How would you like the feature to work? I want to be able to turn off types of objects like I can turn off layers. I want to be able to turn off traces, text, pads, holes, polygons, etc. We can already do this (sort of) with copper pours. Why is this feature important to you? There are times when I need to observe parts of my PCB. Turning off some of the objects would be useful because it would let me isolate what I want to look at. Turning off layers is not enough. #FeatureRequests#
IBNobody 2016-12-07 04:43:39 comment 1 0 Feature Requests
Undo Action always shows hidden copper pours.
BUG Concise problem statement: If I have copper pours turned off (Ctrl-M) and I perform an undo (Ctrl-Z), the copper pour is turned back on and redrawn. It is extremely annoying because on large PCBs and slow laptops, a repour can take 20 seconds or more! Steps to reproduce bug: Draw a copper pour. Design a PCB. Turn off copper pour with Ctrl-M. Move a component. Move another component. Undo the previous move with Ctrl-Z. The copper pour is redrawn. Results: The copper pour is shown and redrawn. Expected results: The copper pour should remain hidden. Browser: Chrome, latest #BugReports#
IBNobody 2016-12-07 04:39:18 comment 1 0 Bug Reports
Move multiple component labels to the opposite side?
I have 87 switches with their labels on the top side. I want to reverse the labels and put them on the bottom. I do not want to put the switches on the bottom, though. What is the easiest way? I tried modifying the EasyEDA file format and changed the layers on all of these labels from layer 3 (top side silk) to layer 4 (bottom side silk), but this does not reverse the text. (The labels would end up backward on the bottom side silk, and I do not want this.) #PCB#
IBNobody 2016-12-06 05:19:23 comment 5 0 Circuit Design
Alt-Snap For Keyboard Arrows
Feature Request Brief title for your desired feature: Alt-Snap For Keyboard Arrows How would you like the feature to work? There are currently two snap sizes that work for the mouse. Normal Snap Size and ALT Snap. The keyboard arrows only have one snap size - Normal Snap Size. I want to be able to use the ALT Snap size with the keyboard. Select a PCB element (pad, trace, footprint, etc) Move the element with the keyboard arrow keys and have it move in increments of Normal Snap. Move the element with ALT + the keyboard arrow keys and have it move in increments of ALT Normal Snap. Why is this feature important to you? I use the keyboard arrow keys frequently to position components. It is annoying to have to manually change the snap size. #FeatureRequests#
IBNobody 2016-11-17 03:27:28 comment 1 0 Feature Requests
Small snap size prevents PCB element movement via arrow keys
BUG Concise problem statement: If I make the PCB snap grid small (0.1 mm or 0.05 mm), I can no longer move a selected PCB element (footprint, trace, hole, pad, etc) via the arrow keys. The element will move one grid tick and then stop. Steps to reproduce bug: Set the PCB snap grid to something small like 0.1mm. Select a pad/trace/footprint. Push the up/down/left/right arrow key on the keyboard. The component will move slightly. Push the up/down/left/right arrow key on the keyboard again. The component will not move any more. Results: PCB element stops moving via the keyboard. Expected results: PCB element should continue to be movable with the keyboard arrow keys. Browser: Chrome Version 54.0.2840.99 m (64-bit) #BugReports#
IBNobody 2016-11-17 03:15:30 comment 3 0 Bug Reports
Slot bug - Rotating slot holes and pads
http://pastebin.com/0T9cHJBX Look at pad gge689. It was a copy of gge683. I created gge683 and gave it an angle of 26.57. I copied this hole to create gge689. I gave gge689 an angle of -26.57. It did not appear to fit the slot area that I wanted, which confused me. I then set the angle of gge689 to 0. I saw gge689 was now lopsided. #BugReports#
IBNobody 2016-10-16 15:06:36 comment 8 0 Bug Reports
More Beta Feedback - 3.10.2
Reference component: http://pastebin.com/p8gJXCF8 I can't wait for the slot tool. It makes my projects look so much better. The slot hole length/angle piece is still difficult to use. It requires too much math. It would be better if I could specify the starting X/Y, the ending X/Y, the diameter of the slot, and the width of the annular ring. This makes it so that I do not have to hand-calculate the hypotenuse (slot length) and angles. Also, the slot X/Y should be set to the starting X/Y not the middle of the slot. When opening "search components and modules" for the first time, it should select a schematic lib or package view by default. Instead, it opens to a blank screen (nothing selected). Add an OPEN option to the main menu to let us open schematics/PCBs rather than using the leftmost frame. Use a dialog similar to the "search components and modules" dialog. Feedback for things still broken in the beta AND in the existing released code: When in trace place mode (or many other modes), the middle mouse button doubles as a left click and right click. This anchors the trace as well as letting you drag the view around. It should not anchor the trace. Sometimes when I place my origin using the origin placement tool, it does not place the origin exactly where I click. In the reference component, set the snap to 5mil and experiment with placing the origin at the centerpoint of some of the holes or pads. You will find that the system has trouble placing the origin at the center of the hole or pad and will offset the origin by 5 mil in either the X or Y direction. The end result is that the hole or pad used at a reference is not at 0,0 but at 0,-5. #FeatureRequests#
IBNobody 2016-10-12 01:00:29 comment 4 0 Feature Requests
What determines the center of a footprint?
I have two similar footprints, both with a center hole at 0,0 on the PCB lib editor. On one, the center hole is treated as the component center. On another, another non-centered pad is treated as the component center. Is it something to do with how the component parts appear in the EasyEDA text-based model? #PCB#
IBNobody 2016-10-10 09:39:30 comment 5 0 Circuit Design
Beta 3.9.4 Feedback - Slots
Slots appear to work well. Consider changing the hole color from #000000to#111111 now that it is possible to have slots without any border indicators. Without this, I could not find my NPTH slots since they have no border. If I create a 75mil diameter hole and a 75mil diameter slot, the hole appears narrower than the slot. Angled slots were hard to create until I saw that the measurement tool gave angles. I learned that if I want my NPTH slots to work well with copper pours, I needed to set the length and width of the "pad" to be equal to the size of the hole. Pad H = 1, Pad W = 1 Pad H = Slot H, Pad W = Slot W I can't wait for this to be a full feature! #FeatureRequests#
IBNobody 2016-10-06 10:05:45 comment 9 0 Feature Requests
Creating Slots for Components
I have had great luck using EasyEDA's tools to create plated and non-plated slots. I now have a new component that I want to try to use, and it is going to need a slot for my application. I want to create special shape for this 5mm x 5mm component. The component would partially fit into a 5mm wide slot. The knees of the leads of the component would rest on pads on the edge of the slot. ![Here is a mockup of the slotted component.][2] (Note that the pads extend into the slot hole in that mockup. I would expect that the PCB CNC mill would just cut that material off. Also note that the bottom of the slot hits the circular hole needed for a Cherry MX switch.) I would like to improve this footprint. I know that CNC machines cannot create perfect squares. Instead of making a 5mm x 5mm square hole, I had to make a 5mm wide slot with two 2.5mm half circles on each end. That makes the footprint be 10mm high. I want to make a smaller footprint that is less than 10mm high. That means I need to reduce the radius of these 2.5mm half circles and also deform them so that they are more elliptical. How can I make the slot smaller (ex 5mm x 7.5mm instead of 5mm x 10mm) without affecting the cost of my board? #PCB#
IBNobody 2016-09-29 00:32:21 comment 5 0 Circuit Design
Meld Traces Together
Feature Request Brief title for your desired feature: Meld PCB Traces Together How would you like the feature to work? Select two traces on the same net that overlap. Hit a hotkey to merge them. Alternately, if a trace segment is being dragged, make it auto-meld to any same-net trace it overlaps. Why is this feature important to you? Convenience. Say that I have the following trace... I want to move it around without tearing it up. I can move the trace segment on the bottom, and the app will adjust the 45 degree bends on the adjacent segments smoothly. However, I cannot move the trace segment on the left in the same fashion because EasyEDA treats it as an endpoint even though it is overlapping another trace segment on the same net. This is frustrating because it requires me to spend extra time fixing the ugly 90 degree bend that appears. #FeatureRequests#
IBNobody 2016-08-23 02:41:59 comment 13 0 Feature Requests
Minor Grammar Error
Here is a minor grammar error that I see whenever someone forks my project. "USER fork your project PROJECT" It should read. "USER forked your project PROJECT" #BugReports#
IBNobody 2016-08-10 23:19:00 comment 1 0 Bug Reports
Output a PCB board outline and hole drill SVG drawing
Output a PCB board outline and hole drill SVG drawing We can currently output SVGs of our PCBs, but it is extremely difficult to get a selective view that only shows the board outlines and NPTHs and PTHs. I have to output everything and then go into illustrator in order to clean up my drawing. Not only do I have to delete all the nets and silkscreen, I have to purge all vias, PTH annular rings, and extra circles that EasyEDA puts around my NPTHs. This is a slow and tedious process. I want a SVG file with accurate holes (NPTH and ringless PTH) and board outlines because of two reasons. One, I want to import the mechanical drawing into a CAD package like Solidworks or Autodesk Inventor. Two, I want to send my mechanical drawing to my laser cutter or 3D printer to get a physical mock up. #FeatureRequests#
IBNobody 2016-08-03 08:19:37 comment 4 0 Feature Requests
EasyEDA PCB Order Price
Are the current prices for EasyEDA's PCB ordering accurate? I put in a simulated order for a standard 2 layer board of 243.8mm * 118.7mm in size, and the cost came out to be $28.4 plus shipping for 5 PCBs. That's a great price, almost too good to be true. Will the PCB prices go up once you switch over to a paid EDA tool? #GeneralDiscuss#
IBNobody 2016-07-26 03:27:26 comment 4 0 Others
Clicking on a property should select the value
This is a minor UI issue, but it gets annoying. If I click a on a property (numeric or text input), the property contents should get highlighted by default. That way, I can just enter the new property value without having to select the previous contents. #FeatureRequests#
IBNobody 2016-07-25 09:59:39 comment 1 0 Feature Requests
Import Changes and Traces
Is it possible to get EasyEda PCB to reparse connected copper to determine what net should be assigned? What I want to do is copy and paste a section of my layout, traces and all. The software will auto increment reference designators but not increment nets. Nor will the import changes force EasyEda PCB to recalculate net names. It ends up creating a bunch of DRC errors. #PCB#
IBNobody 2016-07-24 01:46:58 comment 4 0 Circuit Design