Wierd net errors
Do this as an experiment, see if you will notice this issue. Take a PCB design that has lots of resistors, and in the schematic, change all the resistor numbers. Then update the PCB. You will see a net error for every one of them, of course, because the net name no longer matches the part. I fix this by changing the name of the net in its attribute menu. But,you will also get 1 or 2 net errors that don't make sense. The only way to fix is to delete the net and rewire it. #PCB#
Different pin between schematic and PCB
On the schematic, I wire a pin in one location, and on the PCB the wire goes to a very different pin example. In the schematic, I wire to pin A7, and on the PCB it is connected to pin D11. Pin D11 is wired correctly otherwise, it just now has a wire on it that doesnt belong. #PCB#