Problem assigning custom PCB footprint to schemtic symbol in V6.4.17
Can no longer assign a custom footprint from the Footprint Work Space library to a Schematic Symbol. Custom footprints can be created, and are listed in the Footprint library, but searching the library (when clicking into the Footprint field in the symbol) only returns symbols that were made with previous verisons of EasyEDA. This used to work. Let me know if I can provide an example. #Schematic#
Routing on inner layers
I have had great success with EasyEDA on 2 layer boards. However, when attempting to route more complex designs (4 & 6 layer boards) with inner layers, the router never finishes, but makes very little use of inner layers. In addition the auto-router routes many signals from surface mount parts (e.g. GND and VCC nets) on the top or bottom layer, when connecting directly to the VCC or GND plane using a via next to the SMT pad would be a much better choice. Any guidance or settings on how to teach or configure the router to be more efficient would be appreciated. Thanks, An example: in which router gives up but leaves inner layer 4 (signal layer) virtually unused ... https://easyeda.com/editor#id=|51b58b49f875493c8d2cb1543e4e3edc|828fa2c84e3349f0a67f3c683c270d4f|ecd1d2538b084b05a5c1f0c5d7d563cc|219e746a2c964dbd9bb581db3082f567|7a8f3af820714960843b4d0cc60c8ca2|9e65f0c3ebaf4606a7809f88b49ed65f|de2daafe69a848aea1e3ed88a663a712 #PCB#