asdasdasd
Add component to already routed PCB
Hi I have drawn a schematic and routed the pcb with no problems. Then I decided to add a bit more to the schematic. This was 3 components and a bit of wiring. When I use the "update pcb" function, I expected to find the new components to appear somewhewe outside the pcb layout, ready to be placed and routed. Instead I found a lot of the already placed components and also the new ones outside the border of the pcb. Same thing happens when using "Import Changes" Am I trying to trandfer the component footprints to the PCB incorrectly? Jim #PCB#
JimK 2017-09-23 08:29:32 comment 4 0 Circuit Design
Missing component on PCB
Hi I have constructed a schematic and used the create PCB function and all is well except that one component is missing. I have other components using the same component on the schematic and they appear ok on the PCB. The nets are attached to the invisible part. I have tried erasing the component from the schematic and re installing it to no avail. I have also tried saving the project and then re running it. I have also checked that the component is visible and have turned on different layers in case the component's layer is switched off. When I reinstalled the erased component on the schematic, I did a copy and paste from one of the same components in the circuit. Does anyone have any further suggestions? Jim #PCB#
JimK 2017-09-21 08:17:01 comment 5 0 Circuit Design