asdasdasd
Poor Communication (and PCB Service)
Gesendet: Donnerstag, 3. April 2017 um 15:29 Uhr Von:--------@web.de An: Nicole nicole@easyeda.cc Betreff: about your PCB order ZVJUSs2Cc from EasyEDA Please Produce the PCBs with 1oz Yours sincerely, Jonas Werner Gesendet: Samstag, 01. April 2017 um 12:48 Uhr Von: Nicole nicole@easyeda.cc An: "Jonas Werner" ---------@web.de Betreff: Re:Aw: about your PCB order ZVJUSs2Cc from EasyEDA Dear Jonas, Hi.Good day. Your PCB copper weight is 2oz .As the below,here data is 0.15,and it cann't meet to the actual production needs. Maybe you have to change the desgin or change copper weight from 2oz to 1oz. Please refer to: https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight You can re-upload ,the link is: https://easyeda.com/order/detail?oid=ZVJUSs2Cc Or you can send the new files to me , thanks. ------------------ Original ------------------ From: "Jonas Werner"----------@web.de; Date: Fri, Mar 24, 2017 00:55 AM To: "Nicole"nicole@easyeda.cc; Subject: Aw: about your PCB order ZVJUSs2Cc from EasyEDA Dear Nicole, According to your link (https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight), you are able to produce PCBs with a clearance of 5mil which corresponds 0,127mm. The PCB I'd like to order does not exceed 0,15mm which is 5,9mil. Am I right or is it my convertion mistake? Please correct me if I'm wrong. Yours sincerely, Jonas Werner Gesendet: Donnerstag, 23. März 2017 um 08:18 Uhr Von: Nicole nicole@easyeda.cc An: --------@web.de Betreff: about your PCB order ZVJUSs2Cc from EasyEDA Dear Jonas, Hi.Good day. Your PCB copper weight is 2oz .But the clearance between the tracks is only 0.15mil,we need at least 0.25mil. According to the actual production needs, maybe you have to change the desgin or change copper weight from 2oz to 1oz. Please refer to: https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight You can re-upload ,the link is: https://easyeda.com/order/detail?oid=ZVJUSs2Cc Or you can send the new files to me , thanks. After the email traffic I thought that my PCBs were produced. When the status of my order did not change, I wrote to the support which answered the following: On Fri, Apr 21, 2017 at 11:45 AM, support easyeda support@easyeda.com wrote: Hi, Your PCB has problems, can't be fab, nicole@easyeda.cc sent emails to you ,dyou don't reply And you can ask your full money back On Fri, Apr 21, 2017 at 11:44 AM, support easyeda support@easyeda.com wrote: Hi, Your PCB has problems, can't be fab, nicole@easyeda.cc sent emails to you ,dyou don't reply On Fri, Apr 21, 2017 at 12:58 AM, tawk.to
Jo_de_Beest 2017-04-21 09:25:35 comment 1 0 Others
Copper weight: minimum clearence/track width?
Hello everybody, 2 weeks ago I purchased a PCB and the only feedback I get is following: Dear Jonas, Hi.Good day. Your PCB copper weight is 2oz .As the below,here data is 0.15,and it cann't meet to the actual production needs. Maybe you have to change the desgin or change copper weight from 2oz to 1oz. Please refer to: [https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight][1] You can re-upload ,the link is: https://easyeda.com/order/detail?oid=ZVJUSs2Cc Or you can send the new files to me , thanks. My fist reply was: Dear Nicole, According to your link (https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight), you are able to produce PCBs with a clearance of 5mil which corresponds 0,127mm. The PCB I'd like to order does not exceed 0,15mm which is 5,9mil. Am I right or is it my convertion mistake? Please correct me if I'm wrong. Yours sincerely, Jonas Werner My question is: Is it possible to produce such a PCB with 2oz copper and a clearance/track width of 0.15mm? I am not sure if it's my mistake or is their description (https://easyeda.com/Doc/Tutorial/PCBOrderFAQ#Copper-Weight) wrong? Thanks for your replies! Cheers Jonas #PCB#
Jo_de_Beest 2017-04-02 13:26:23 comment 0 0 Circuit Design