asdasdasd
I started a new project, and it is really small and simple, yet I need to make a terminal part, and I see no way.
Did something change with making your own parts? I want to create a 2 position strip, but I see no way to do that. It use to be in the very left column, but with all the clicking to find it, I don't see how I can make the part. I know they update the software a lot, but it makes it hard to find things when they change too much. Joe. #Schematic#
Joseph Massimino 2020-06-25 16:03:18 comment 1 0 Circuit Design
Copper fill still does not work as it did previously
Is there a reason that copper fill does not show up, it only shows the outline of copper fill. Also, my copper fill is the ground, and when I autoroute, none of the circuit attaches its ground to it. I did correct all the rest of this project, but the copper fill has to work as ground as it was placed as a ground copper fill. Until that happens, I am stuck trying to figure it out. #PCB#
Joseph Massimino 2020-03-30 21:41:47 comment 18 0 Circuit Design
Can't print schematics, it does nothing.
I can't print a schematic, the system is not working, and there is no way to cut and paste into wordpad, or some other utility on my PC. So I used a utility that lets me grab anything on the screen and print it, and that worked. Other than that, i won't be able to do this project until whatever is going on is fixed. #GeneralDiscuss#
Joseph Massimino 2020-03-26 17:15:19 comment 21 0 Others
Downloaded the software to use locally, but there is a flaw in it
I downloaded the software and then put my schematic it it, then the PCB, then tried to save it and order boards, but no go. It wanted me to have a second email address to log in. WTF is that about, why not link it to my online data and let me use the same email, They did a pretty good job on the software for most things, but now I am at a stand still. They must have shut down the factory because of the virus, so getting help is not going so well. the boards i want to order have to be tested by me first, and i can't get that far. I guess I will wait for things to get back to normal in China. I sure hope all the people in the factory did not die from the virus, they are skilled workers and ver good at most of what they do. #BugReports#
Joseph Massimino 2020-03-26 16:59:11 comment 0 0 Bug Reports
Net errors, what do they mean?
I get net errors on all sections of the schematic, even though some connections are from point A to point B, and nothing inline. I can delete it and put it back, but I still get net errors, can someone exp[lain what causes them, and why i get them on every connection? I get them when I go to turn it to PCB, it asks if I want to see the net errors, so I do, and I get a very big list of them that cover all connections, that is impossible, this is not my first project, i've done many. #PCB#
Joseph Massimino 2020-03-25 19:54:19 comment 3 0 Circuit Design
When making changes to resistors on schematic , updating the PCB sits at 1% forever, or canceled.
Why does an update of something as simple as a resistor, take forever to updater the pcb image, and sits at 1% and does not move.? #PCB#
Joseph Massimino 2020-03-23 20:21:15 comment 5 0 Circuit Design
Copper that does not belong, can't get rid of it
This shows a bit of copper that I can't get off of the image of the board. Any ideas of how to get rid of it might help. This is just another bug in the software that they will blame on me. It is on the bottom left connector sticking out to the left. I can scrape it off my own test board, but I can't have the board made this way. Oh, and the other trace that does not reach the pad is something that is not correct. Go ahead and tell me what I did wrong. #PCB#
Joseph Massimino 2019-08-10 17:46:05 comment 4 0 Circuit Design
I had 600 boards made, and they don't match my schematic
The power switch on the schematic should turn power on, and I was not getting power. i took a board and examined it and the power switch is not connected properly. I went through something like this before, but it was my fault for using a customers part tht had zero holes for transformer legs. Those boards were a big waste of my money and went in the trash. I now make my own parts that i can find, and test them, yet my 600 boards are going to be nearly impossible to fix, and I am out $180 in costs. This is bull shit, and I will have to find another company to make my boards. #PCB#
Joseph Massimino 2019-07-30 17:22:50 comment 7 0 Circuit Design
resizing my board is sometimes a problem, so if I delete the board, how do I make a new board
I need to make a new board around my circuit, I looked at the choices of tools, but I'm not sure which one will let me do that. Would it be better to start a new project, then make the board and paste my circuit into it? #PCB#
Joseph Massimino 2019-07-19 22:19:23 comment 1 0 Circuit Design
I got past all my problems, but then I had to resize a part, and my board is gone, but the circuit is there
So I was in the last sizing up of things after making a test board, and while I was working on a part, my board is gone, but the circuit is there. How do I draw the board back, as going forward or backward does not restore the board? #PCB#
Joseph Massimino 2019-07-18 17:29:12 comment 2 0 Circuit Design
My schematic appears in the small preview window, but it is not there for me to edit
What is going on where my schematic is not able to be opened, but preview shows that it is there. and my PCB design is there, and able to be opened. I need to edit one part, and can't do it if I can't open the schematic. It is the Trinity board where you see one sub folder for a copper image of the PCB. I am going to log out, and log back in and see if I can open it. This is nonsense, do they mess with the file system when we are not logged in?, #Schematic#
Joseph Massimino 2019-07-10 01:42:00 comment 10 0 Circuit Design
I use to be able to print a test board as 1:1, but no longer can do that, has something changed?
I have a very simple 1 inch board that I need to test, but I can't print it 1:1, has this been removed from easyEDA? Or did the path to it change? #GeneralDiscuss#
Joseph Massimino 2019-03-31 21:34:05 comment 4 0 Others
Why can't I find a Atmel Tiny85 chip.
I find things from others that are wrong, but nothing from Atmel with a standard Tiny85. Many of what I found did not show ground on pin 4, so I did not look any further. When I went into make my own part, the system did not give me tools to add pins, it gave me regular PCB tools, not part editing tools. I get really frustrated with the software. What am i doing wrong now? When I get the correct tools, i create a outline of the part in silkscreen, then the pins in topview where i add pins and number them. So i have not found the Tiny85 I can use, and i can't create the Tiny85 that I can use. What is going on? EDIT: So I went back into it and it went correctly this time, so something odd is going on in the software. #Skill#
Joseph Massimino 2018-11-07 00:06:18 comment 6 0 Circuit Design
Silkscreen error, can't fix it
It appears that the switch I created has a while block in the silcreen over the switch, yet I can't see it when i look using layers to see just the silkscreen layer. it does not show up, so I can't change it, yet it appears in my PCB order, and they kept asking me if it was right. I told them no, and I sent them screen shots of the silkscreen layer, an the top copper layer, the while block does not show. I looked at properties, and the place where it says Fill, says no. So they will make them with the white block over the switch in the silkscreen. I guess it could be worse. This is what they see, but I can't see it in the software. This only shows up when I submit the board to be made. #PCB#
Joseph Massimino 2018-11-03 12:53:26 comment 12 0 PCB
When I go to upload my image for board making, my top image is messed up
Can someone explain why I am getting a white block over my switch location, when I don't see it when I look at the gerber image on my PC? I can't send this in until it looks ok after I upload it. I tried a few times in between checking the files on my PC and then sending them up, but each time, I get that white block over thye top of the board, but not the bottom. #PCB#
Joseph Massimino 2018-10-28 17:57:03 comment 8 0 PCB
Have any of the people who use English as a primary language, considered writing a PDF book for all the most asked questions ?
A PDf book that could be updated as new information becomes known, to include PCB problems, part creation problems, autorouting problems , and others, with detailed instructions on how to deal with each, would be very useful. Make the PDF book searchable and it could be a valuable resource. Many of the answers I get don't go into enough detail. For instance, when creating a part, they show how to setup snap, and adjust snap to get parts laid out, but they never consider that there spacing on parts varies, where some spacing might be 2mm, but other spacing on the same part can be 2.5mm, and other sizes. I don't do a lot of projects, so what i learn, sometimes gets forgotten by the next time I need it. #GeneralDiscuss#
Joseph Massimino 2018-10-21 19:23:41 comment 0 0 Others
Trying to attach PCB image to Schematic Image, getting this, what did I do wrong?
I created a PCB image, but when I go to attach it to my Schematic imager, I get this. It appears to have something wrong, even though when I look at the PCB image, it looks OK. I'm sure it is some setting I did not set properly. I also was annoyed that I can not update a PCB image that I saved, and made some corrections to. This explains why I sometimes get user parts that are garbage, let a user update parts that he or she contributes. OK, so I raised two points, but one can be corrected, and the other is simply a critique of the part creation process that I think is flawed. #Skill#
Joseph Massimino 2018-10-21 16:38:36 comment 19 0 Circuit Design
My current schematic is no longer routing properly at all, is this about the update I did not apply?
My schematic looks fine, and it use to autoroute with no problems, but it only got worse each time, especially after I deleted the PCB and told it to build a new PCB, even more parts would not route at all, they stood with nothing connected. I have to think that the update has something to do with all these new problems. #PCB#
Joseph Massimino 2018-10-17 18:12:29 comment 9 0 Circuit Design
Odd occurrence when generating PCB update
I edited my schematic to have an extra pad where a meter will connect. It was simply a different spacing to fit more than one meter. When I updated my PCB, it generated extra Antenna ground connection, so now I have two antenna grounds, and the autorouter is having problems. I understand why the autorouter would have a problem, since I looked back, and there was no reason for the extra antenna ground to appear. So the autorouter is now confused, just like me. Does anyone have any ideas how that happened, and is there an easy way to get back to reality? I did try to delete it, but nope, it won't do it. Joe #PCB#
Joseph Massimino 2018-10-16 19:11:25 comment 2 0 Circuit Design
Is there a way to easily change a part on the PCB, as it size, by editing it?
I have been having a hard time with creating my DP3T slide switch, getting so precise is important to make sure parts fit the way they should. I have the correct general shape and pins on the pcb view, but I need to change them. Is there a way to change the over all size of entire switch without going back to the schematic? In the schematic view, I have snap down to .1 mm, and then it becomes hard to get things exactly where they need to be. Why can't the EasyEDA people expand their library of parts, as it can only lead to less problems for people who are not experts as using all the tools. The demo they do is simplistic, and never addresses the more complicated process of making something that matches an engineering drawing. Just placing pads on a page and drawing a box around it is child's play. Making a switch from a drawing that is exact, is much more difficult. #Skill#
Joseph Massimino 2018-10-12 19:06:42 comment 7 0 Circuit Design
Video Tutorial leaves information out of part creation
When the part was created for the PCB, it can not be used that way, it must have a schematic symbol to go with it. The video tutorial leaves that step out, so it is almost useless to create a PCB part, without the schematic part to match it.. #FeatureRequests#
Joseph Massimino 2018-10-11 04:46:53 comment 6 0 Feature Requests
I thought I was done, but there are connections that should not be.
I have a switch that is a dP3T slide, and the two poles come from a BNC. When i examine the PCB, i see connections that don't match the schematic they came from. How can that be? I am so close of having these made, but I am very careful to examine everything, but now I can't trust what the autorouter is doing. Here is the board https://easyeda.com/joe.massimino/20db-attenuator So I looked at the schematic and it is correct, so I ran it to a new PCB and what I think is going on, is the pins on the switch are misplaced. So I'm trying to figure out the next step. So after looking at other parts that resembled the same switch, none had the same perfect measurements as what I have now. So my only recourse is to wired the board myself, is disregard using autoroute. Update: I can't create a PCB with just parts, it will not allow it. So what I need is to get a properly wired DP3T switch , and none come up in the library when I search. Maybe someone has one that they can give me, or I will have to edit the switch I have. #PCB#
Joseph Massimino 2018-10-10 19:01:55 comment 11 0 Circuit Design
Part used is not found, so I want to edit a part so it can be mine, how do I do that?
I found a DPDT switch in a part search, what troubles me is that EasyEDA lets people put incomplete parts in the library. So when I went to put it to a PCB, it could not find the package. So I wen looking for another DPDT switch, and there were a ton of them, but many were not DPDT, and the ones that were came up in an odd package. So I tried to find one to match a common DPDT, and I need to make sure the spacing on the pins is correct, but when I choose edit, it shows me the schematic view, and not the package view. So I have to learn a new skill, that is to create a part for myself and keep it in my own list of parts. I will really like that I can do that, but have not been able to figure it out. I will start with a part I find, then want to edit the part so it matches what I have. I have a switch that has a part number of PS2273 , and it is a DPDT switch, but that number does not come up in the parts search, but one that looks like it does come up in the DPDT search. so I need to edit it, and save it for my future use. Is there a simple way to go about this? #Skill#
Joseph Massimino 2018-10-07 18:04:35 comment 2 0 Circuit Design
How do I connect my circuit to a Pad that I put on the PCB
I created a pad with hole on the edge of my PCB, it is where a wire will eventually attach to the board. I have tried to draw a trace from a very close point, but it will not let me attach to the pad. So I went back to the schematic to see if i could enter the pad there and connect it, but no, I can create a pad there that i could see. I will have to do a few of these pads that connect to the circuit, so I have to figure this out. Thanks for the help, Joe #PCB#
Joseph Massimino 2018-10-05 04:13:00 comment 5 0 Circuit Design
Part problem, what is going on with parts?
So I search for 4046 , which is a VCO chip, and I found the through hole version, but the version I have is the SMD. So that goes by the number PW4046, and there is one, but it is not matching the actual part, so somone made it and arranged the pin numbers the way they wanted them, and left some off that I need. So I tried to edit the part and change the pin numbers to what they would be on the actual part, and the labels to go along. I have to say that my experience with the software tells me that I am headed for misery, in that I am leaving room for some terrible result in my board. So this brings me to another issue, parts that I used on previous boards could not be found, so I had to resort to opening old projects and copying the part I need, and making 5 or 6 and changing the values and part numbers to go along with the way I am using them. So what the heck is going on with parts that were once in the system, but no longer can be found? The parts I copied were jelly bean parts, 1206 capacitors and resistors, but this 4046 chip is new to my design, and it has to be right. What can I do to edit the part I have so it shows all the proper pins where they belong? EasyEDA has some big problems with parts, don't they try to make the list accurate and have as many parts as possible? I use to be able to find parts from Aliexpress, and other places, and now I don't find much of anything. Yes, I have logged in, and yes I have been using the software for a lot of hours, so I am sure something changed in the way it is finding parts. This one issue is costing me entire days of trying to fix this one part. This is the image of the chip that I found that was edited by someone else, notice that the pins are out of order, where they should start on the left with pin 1 at the top, and directly across the last pin is 16, but they are not all in order the way the chip would be normally. Is there a way for me to either fix this chip, or create one of my own, since I have been finding to many problems in using parts from the library, some are just missing, and others are not there, or they are wrong. When I edit this chip, I can change the location of the pins, I can only edit what the pins say, as in what pin number it is and what it is called. There are other pins on the chip that simply don't show up, and I see no way to add them. The ideal situation would be for me to create the 16 pin blank and edit all the pins for my own use. UPDATE: I did find myself in a part editor, and after I edited the part to look exactly the way I needed, I saw not way to put it in my schematic, and I lost it. So this is getting old fast. Once I get a blank part and edit it, how do I save it to my own parts list, and get it into my schematic so I can update my PCB with the correct part? #Skill#
Joseph Massimino 2018-10-02 15:28:59 comment 16 0 Circuit Design
How do I cross wires so they don't connect on a schematic ?
I'm finding that the parts I am connecting have wires that have to cross each other and not make a connection, is there a way to break the connection that the wire placement makes, even when I don't stop on the wire, I keep going past it? I looked at all different possibilities, but I am at a loss of how to continue until I get this problem solved. Thanks for any help on this. #Skill#
Joseph Massimino 2018-09-30 18:49:48 comment 28 0 Circuit Design
Components can't be found that I have used on other boards, what's going on?
When i search for a .001 uf capacitor, and can't get one, what I get is a 10uf through hole capacitor, when i am looking for a .001 uf smd capacitor. This has been going on in the last few days on a new board design. I can't get to the PCB until I get a schematic created. So I thought if I find any value of smd with the right footprint, i can place it and the n change the information on it. That might be a work around , but why do we have to have to use so many workarounds to get a good schematic? The next potential problem is when I selected a LMC6482 , which is a duel rail to rail op-amp. It gives me one side of the chip, but I need the pad for the whole chip because I disable the second part of the chip, so it is there, ai just don't use it. Next, I want to place a meter in the circuit, but maybe i don't. I will have to have the meter ,and put mounting holes on the board for the meter to be centered on the board which will mount behind the meter. So my guess is that I have to do that when I get to the PCB, and add the pads of the right size, and spacing. Am i tight? Thanks for any guidance on these issues. #BugReports#
Joseph Massimino 2018-09-30 17:14:36 comment 1 0 Bug Reports
Getting DRC errors with nothing showing
The DRC errors might be that traces are routed to the center of the pads, so there is a dot at the end of the trace, and it is dead center inside the pads. I'm not sure about this, but the next issue could be the transformer I use , it was put in the library with no holes, so i add the holes, and the traces route to the center of the hole, instead of to the edge. Maybe this is not the problem either. I need some expert help, as the board is all done, and i want to generate a gerber file so i can print it and check components on the image. Easy to see DRC errors are easy to fix, but when you don't get anything listed, only DRC error, it is difficult to figure out. The board is not complicated, and i use the autorouter locally, and it runs fast and finishes in a second ot two. My feeling is that if the trace ends up inside the pad hole of a part, it should not be a big deal since the pad will get drilled, and any copper inside the pad will be removed. My guess is that the autorouter doesn't take that into consideration, Any help on this will be appreciated. Joe #PCB#
Joseph Massimino 2018-09-25 05:18:43 comment 7 0 Circuit Design
My trace from a part to a pad is putting the trace inside the hole of the pad.
I have a trace that generates an error, it is blocking a hole in a pad. I keeping pulling it out, then Autorouting and it puts it right back where is should not be. I have several other pads that are ok, just this one popped up out of nowhere with this error. Is there an easy way to fix it? Joe #PCB#
Joseph Massimino 2018-05-09 21:24:38 comment 4 0 Circuit Design
Is there a way to pit two pins for a jumper on PCB view?
I have tow points on my circuit board that are sometimes joined together. I want to add two pins that can accept a jumper to do that. Is there a way to put that jumper on the board and join each side to two pads without going back to the schematic view? Please tell me where to find it, or do I fabricate it by make two pads and joining them? #PCB#
Joseph Massimino 2018-04-29 16:41:23 comment 3 0 Circuit Design