UPGRADES
Could you change the "ask for upgrade box" to allow the user to click on save, when it says you need to save your work, before you have to say no to the upgrade first. That has come up several days in a row, then I must first close out the upgrade box, and then go looking for manual upgrade, can't find it, and then go on with my work. This time I will figure out how to do the upgrade manually, but it would be easier if I could just save, then allow the system to do the upgrade automatically. Thank You Craig Chamberlain #FeatureRequests#
Having trouble connecting a trace on inner layer 1 to top layer.
As the attached .JPG shows, the ratline still exists on pointed out trace, despite the fact I was not having trouble doing the same on other nets/traces. Ideas? -Lisa D https://easyeda.com/editor#id=efd87536b73a4959a680d78a01346dd6|c9279a7958064c3c83d23789c52cbc2c #PCB#
TRYING TO PRINT OUT A 1:1 LAYOUT FOR PART SIZING CHECK.
Hello, Upon opening my PCB editor, the origin is at -490,-390, (aprox). And my PCB is a dot way off the page, that I must zoom into to see/ work on. I am unable to find any via's, parts, or anything else, not right around the PCB. Because of this I am unable to print a 1:1 layout to check part sizing, etc. All I get is a page full of canvas. I am using the 'Export PDF' function to do this. I would be grateful for a second eye on this problem. -Lisa Dalton https://easyeda.com/editor#id=efd87536b73a4959a680d78a01346dd6|c9279a7958064c3c83d23789c52cbc2c #PCB#
1 SINGLE TRACE IS HOLDING UP MY ORDER....HELP!!!! You there @andyfierman?
Hello, One trace is not connecting on the bottom of the board. It is between R5 and L9, using 2 via's to connect them, and on the schematic I have no errors, on the PCB editor the only DRC error is that trace that still has the ratline. I have it connected by looking at it, but with the ratline being there, it's not connected in the Gerber File. I have done several via connections like this, this one won't take! Help! I need to finish this, and the only hold-up I'm aware of is this trace. If anyone sees anything else wrong, please, I'm open for suggestions! Thanks in advance. -Lisa D Below is the project link\, the PCB to look at is "ac-dc_pcb for_test_pour" (there are 2 pcb's)\, Ignore the other PCB\, it's a fallback I plan to delete when done. https://easyeda.com/editor#id=|0e1962d564f344cf862c6e1508e00e84|41667aa2370b477c9ea03febbc8c405c|c094f3a6b53947aca654c0f97b01f3ed #PCB#
DO THE OUTLINES IN THE KEEP-OUT AREAS IN PCB EDITOR SHOW ON THE PCB DELIVERED?
Topic title says it all. See attached pic from the tutorial. Same lines show on my PCB layout. DO THE OUTLINES IN THE KEEP-OUT AREAS IN PCB EDITOR SHOW ON THE PCB DELIVERED? #PCB#
Is there a way to undo a Cu pour after it's been saved?
Hello, Title pretty much says it all. https://easyeda.com/editor#id=0e1962d564f344cf862c6e1508e00e84|41667aa2370b477c9ea03febbc8c405c Thanks, Lisa D #PCB#
In schematic editor, no verification of whether project saved or not.
In schematic editor, no verification of whether project saved or not. PCB side works every time, However, It's either intermittent or all the time , there is no verification of a save attempt in Schematic Capture. -Lisa D #BugReports#
New PCB layout software. Move function, leaving ratlines behind. Other parts also.
When using the 'MOVE' command,(the hand icon). I first click on the move icon, then drew a rectangle around EVERYTHING on the board, all edges included, yet the system was leaving parts, mainly ratlines behind. #BugReports#
I need to move PCB in same folder as Schematic.
Hello, As the Schematic is complete, and the PCB will be completed very soon, I would hate t make an error now in transferring my files incorrectly and lose something. The Schematic is in FOLDER; AC INPUT PS, and the PCB is the other folder labeled; AC INPUT PS 1, or vice versa. I just need to combine them into the same folder. They have been made public, if you want to handle this one quickly for now. (I will learn to do it in the future), Or you may tell me how to handle this issue. The new software looks good by the way, the CUT portion of the Cut and Paste is not blatantly obvious as in the original version however. Thank You, -Lisa D #Skill#
Best practice w/ layout of Line AC input on multi layer Board's?
Hello All, I will be using a 4 layer board, which while I have worked with extensively, I have not done P.S. layout with Line Level inputs. The P.S. in question has been made schematically to meet FCC EMI (conducted and radiating)testing for Consumer Electronics. Now at least as important to meet these EMI standards is the board layout. While I have quite a bit of experience in this area, none of it included Line level inputs. The power supply was always of the power cube type, with DC coming in. The Power cube power supply is not an option on this project. I am looking for anyone (@andyfierman?)who may be able to just give me an idea of common or best practice in the area of the input, before rectification, given the EMI suppression considerations. The schematic and pcb have been made public,https://easyeda.com/editor#id=8cc3136fa92b40e39947de01f186babe|50df637df5b64b2086e19ac2eeb21a0d Thank you, -Lisa #PCB#
Can a section of schematic be copied and pasted into a different project?
Can a section of schematic be copied and pasted into a different project? Title says it all Thanks #PCB#
UNABLE TO ASSEMBLE AND ASSOCIATE FOOTPRINT W/TEST POINT
Hello, I made a schematic symbol with pin connected in correct direction, the symbol would show up when updating the Power Supply circuit. However there was no net connecting it to PCB where I put the Test Points in the Schematic. I tried remaking the Test Point,I am unable to assemble the new footprint, as there is no 'assemble'/ 'disassemble' symbol in the tools menu. Project name:AC-DC POWER SUPPLY. Any thoughts? Thank you, Lisa D. #PCB#
MODIFIED PART, HOW DO I GET THE FOOTPRINT NAME CHANGED?
I have tried "Adding a a new parameter" and putting in a new package name, but the software ignores the new package name, and won't allow me to change the empty original package name. Any thoughts? Thanks, Lisa Dalton #PCB#