Cloned PCB has no schematic
Hello, I fear I have messed up but am hoping my mess is salvageable. I created a schematic and from that the pcb. I completed the layout for that PCB but then I realised I would like to move one of the components to the underside. I decided to clone the PCB so I could make the change on a new PCB. All good and made the change and am happy with the PCB. My problem is there is now no schematic associated with this cloned PCB. Is there anyway to either associate the original schematic with this cloned PCB or is there a way to create a schematic from a the cloned PCB. I am not sure if when cloning the PCB I had an option to also clone the schematic but would like to know for next time. #Schematic#
LTSpice in EasyEDA Pro edition
Hello, I have been using EasyEDA standard for some time and been very happy with its schematic and PCB design capabilities but less so with its Simulation capabilities. I currently use LTSpice on my desktop for design and simulation of some circuits. I have now installed EasyEDA Pro as it appears to offer some more poewerful design options but cant see anywhere in the PRO interface to run LTSpice simulations. Is this option available in PRO and if so can anyone advise where I will find it? I have also read (via AndyFierman post) that EasyEDA Pro can import LTSpice netlists and components if files are in the correct formats but will the LTSpice netlist when setup with its components be able to be simulated in PRO? If there is a tutorial available on this topic for PRO I would really like a link. Cheers and thank you in advance for any responses and advice Les #Schematic#
Have I missed something with an Update?
I have been out of action for about 5 weeks and unable to access my EasyEDA designs. When last used it had 8 or 9 dprojects with several schematics and PCB layouts in each project. Now when I open EasyEDA I have my ID showing but no projects and no obvious (to me anyway) way to find where they have gone to or recover them. W hat happened?? I see there is a new Pro version available but if I cant recover all the previous projects then whats the point of changing. Sure hope someone can enlightenme on what has happened and how to proceed. #GeneralDiscuss#
Spice Simulation Components
@andyfierman Hello, I have read the very good tutorial on Libraries and see at the start where it References EELib and indicates that many of the parts in that library can be simulated. Am I correct to assume that EELib is now "Commonly Library" The Library Symbole appears to be the same. If that library does have componets with Spice simulation data attached how do I identify those parts as I can see no indication anywhere of which ones are suitable for simulation. Additionally if I am using a component that is not in the Commonly Library but is available from LCSC (in this case a TLV62569) is there any way to identify if the part has Spice simulation data and if none is there a tutorial available explaining how I can either add the data or use a component from TI that supposedly has the Spice data included. As anyone reading this will see I am reqlly floundering around here trying to understand how to simulate a circuit before send it for manufacture by JLCpcb. Hope someone can help. Cheers #Simulation#
Checking Schematic for net connections
@andyfierman Hello, I have been using EasyEDA for some time now but have still not found any way to check the nets in a schematic without using the "Convert to PCB" option. Maybe this method of checking is the only option in EasyEDA and I am just used to Eagle where it was an option while in schematic mode. Maybe as well any experienced user, which I am definitely not, would not see such a check as necessary but surely not all schematics are converted to PCB? Cheers and thank you in advance for any help/advice. Leslie #Schematic#
Imported schematic Nets
Hello, I have imported a schematic I built in to another schematic using the copy and paste process. I find when looking at the Nets for the combined schemtics the original schematic shows all it its Nets in the Design Manager but the new schematic Nets are not listed. I am obviously doing something wrong and probably silly but cant find a reference in the Tutes or help to explain what I have done wrong. If any one can advise it would be appreciated. Regards EDIT I worked out what I was missing and now all good so please ignore. #Schematic#
Replacing generic parts in Schematic
@andyfierman Hello all, I have found a Schematic on the OSHWLab site for a Lipo charger and now have it open in EasyEDA. Many of the parts are generic components with no manufacturer name or part number so the BOM is incomplete for manufacture by JLCpcb. I realise this is as it should be for such a design and am just delighted that so many very clever people make their designs so freely available. My question is in changing the parts to a JLCpcb library part am I best to just search the library for an instock part with same specifications and package and manually place it in the schematic or is there a way to choose the part in EasyEDA, search for a replacement in the library and then have the replacement part auto update the part info and replace the generic part's symbol? I havent been able to find such an option so am assuming it is not available but thought I would ask just in case. Regards #Schematic#
Adding mounting Holes to Schematic
In the very helpful "Welcome to EasyEDA" the author recommends placing all components required for the PCB in the Schematic to ensure that when the PCB is updated from a revised schematic it doesnt dissappear the items added via the PCB tools. I am, however, unable to find any information on how to add holes as footprints or in any form in the schematic. Can anyone advise please. Thank you in advance although I am guessing the question has already been asked and answered but I cant find that answer unfortunately. @andyfierman #Schematic#
Plated Through Hole in Schematic
Hello, I am designing a schematic for a PCB for manufacture by JLCPCB and will be adding three components to plated through holes-4 holes in total. The only way I can see to create a PTH in the schematic is to add 1xpin header for each of the 4 holes I require. The PCB then, when created, includes through holes for the Header pins. I am however thinking of having the board assembled by JLCPCB as it contains some very small SMT components way beyond my soldering capability. Is excludng the header pins from the BOM the only solution to keeping the header pins from being installed on assembly or is there a better way? I was hoping there might be a PTH component/connector that I might insert into the Schematic and then have it transferred to the PCB when created but have been unable to find any such part - but maybe I am completely off track as the PTH is not really a component so how could it then exist in a schematic? I know I can add a PTH directly to the PCB but there then appeaars no way to update the schematic to show those PTH I have added to the PCB so the Schematic then becomes inaccurate - and I guess I just believe the schematic should be the driver of the design not the PCB. Hope someone can advise on this question so I dont have to continue thinking I am just missing something or just being naive in my design process. #Schematic#