[Alternate Fixing] Invalid PCB Problem Solution
Since i found the problem "invalid PCB" and i couldn't find any solution in the forum so i decided another way to use other software to help solve the problem on PCB route automatically in EasyEDA. I have no other choice but to use other software, but I can't leave EasyEDA software because some libraries are only available in EasyEDA so I did this I see that there is support export files to other software that allows to route the PCB , so I use the altium software. Here are the steps I did when using the altium software to route the PCB: Select the "No, Export Altium" section then download and save in your directory Open the Altium Designer software, select File > Open (don't select Open Project) then select the file that you saved from the EasyEDA software Once your project is open, select Route > Auto Route > All... Then you can directly route your PCB by pressing "Route All" or you can set up the PCB by clicking "Edit Rules ..." Here are the results I have I hope this helps those of you who have the same problem as me Regards -Dzikry #Skill#