DRC Errors unable to fix it
Hello, I have this project and would like to order the PCB only, it is a two sides PCB (2 layers) but when ask to generate the gerber file the DRC give me 6 errors which I am unable to fix it. I will post the file link from my dropbox here if someone would like to spend some time to check if the erros appears in your space. Any help would be greatly appreciated. https://www.dropbox.com/scl/fi/b1iatj4hptgsel6vd64j5/Gerber_PCB_PCB_Manolo.zip?rlkey=pyw1ws88bwgyxvyvusmpbkonn&dl=0 #PCB#
Copper Area to GND
Hello, for some reason after applied the Copper Area (GND) over my PCB all GND connexions still have the blue lines. What am I missing? GND are the small rectangles and the four Bigger Round. Everything is in at the Top Layer. All connexions are Multi-Layer. #PCB#
Copper area GND errors
Hello, I have this blue line asking for connect two GND (small Squares) even I have the Copper Area set to GND. Clearly both GND squares have enough connection via the Copper Area. There is no error in the DRC. There is an error in the GND Nets. Possible cause: I was using Copper Zone Invisible and for mistake I made another Copper Area on top of this, I use Undo but I am not sure if the second GND Copper Area was undid. I have no idea how to delete Copper Area and could not find anything in the web. Any help is more than welcome. #Skill#
Copper area GND errors
Hello, I have this blue line asking for connect two GND (small Squares) even I have the Copper Area set to GND. Clearly both GND squares have enough connection via the Copper Area. There is no error in the DRC. There is an error in the GND Nets. Possible cause: I was using Copper Zone Invisible and for mistake I made another Copper Area on top of this, I use Undo but I am not sure if the second GND Copper Area was undid. I have no idea how to delete Copper Area and could not find anything in the web. Any help is more than welcome. #Skill#
BoardOutline missing parts
Hello, for some reason (my fault), parts of the board outline of my PCB is missing, the remaining are in magenta top left side. Tried to make a new one but when I run error says no board outIine, Tried to ad tracks in the missing parts same result. Any tips? #Skill#
Pad hole for screw
Hello, I just set 4 pad holes for support and fix the PCB, but when I run the DRC it show all 4 errors as Clearances, is there a way to check where is the clearance measures for this pads? I already printed and there as a lot of spaces for the holes. The copper area is the GND. #PCB#
Cooper Area GND
Hello, Wonder if I can delete Copper Area GND when applied to all PCB area? I can delete any symbol or traces but the Copper area. Is that A bug or I am doing something wrong? Cheers. #Schematic#
Holes not showing in gerber files
Hello, I wonder what is happening with this PCB, the holes are not showing in the gerber files. Any help is more than welcome. #PCB#
Copper area GND
Hello, I am trying to figure out the "Incomplete connection" error I am getting when I try to generate the Gerber files, it shows all GND pins as "Incomplete connection", already set the area to almost the entire PCB (I would like to have the minimum possible) but still getting same error. The PCB is one side only. Any Help is more than welcome. Please correct me if the link is not correct, It is my first time publishing in this great forum #PCB#
which part to choose.
Hello, sorry for the rookie question but is my first time building a PCB and would like to order the correct set. I am trying to build a simple 7 digits display with 4+3 digits using Mega 7219 there are much more options than I preview. Would somebody waste 5 minutes to help me? What is need is this: 1- Max7219CWG- https://lcsc.com/product-detail/Driver-High-Current_MAXIM_MAX7219CWG_MAX7219CWG_C9964.html 2- 10uF Capacitor - 3- 100nF Capacitor - 4- 10k ohm resistor - 5- 7Digit Display 4bits white 6- 7Digit Display 3bits white Thanks in advance: #GeneralDiscuss#