asdasdasd
ratline problem
I'm baffled by a ratline problem I'm having with a PCB design I'm working on. I have laid out a number of boards using EasyEDA without problems so this problem is puzzling to me. I'm using a 4-layer board. I have defined Inner2, in green, as GND. My screenshot below confirms that because I clicked on the copper layer so the net name is shown. The top pad for capacitor C6 also is supposed to be connected to GND, in my schematic. I've got a via connecting top metal (red) to the GND plane trace that goes to the GND copper layer. Yet it's shown as being unconnected. I have refreshed the display and refreshed all copper layers, to no avail. I also have tried a variation where I drew a top-metal line over my GND plane and dropped a via there. The ratline remains. It's puzzling because I have an SMT resistor in a different portion of the board that's connected to GND and it has no ratline. It is the vertical green rectangle shown in my screenshot. BUT it gets even more interesting because that portion of the GND plane is a different rectangle (I broke up my GND planes due to concerns about parasicit capacitance). If I re-route my problematic capacitor connection to THAT rectangle, the ratline disappears. I found that if I placed a via over a region where both GND regions overlap, the ratline also disappears. Therefore, I believe this is a bug in the layout program. Word of warning. What's going on? #PCB#
MarkEm 2024-08-25 03:08:37 comment 2 0 Circuit Design
DRC fail: unconnected net, PCB design
The background: I'm laying out a phono preamp board that uses 4 layers. Inner1 is GND. I'm getting an odd unconnected net error associated with a custom footprint I designed. My first sceenshot shows the highlighted net with the offending ratline. The second screen shot shows the result if I make the connection to a nearby GND net: This indicates (to me) that my footprint is OK I have split the grounds to get better channel-to-channel isolation so the connection I want to make MUST be to a more-remote GND net. I'm pretty sure the connection will be made but I think it would be "nice" to determine just why this is happening. #PCB#
MarkEm 2024-01-12 20:12:18 comment 3 0 Circuit Design
1N914 PCB footprint is incorrect for the first selection in the library
Using the bog-standard 1N914 as a generic small-signal diode in a design. Did a search to find it in the library, chose the first in a DO-35 package in the list. When I went to designing the PCB I noticed something odd, the cathode marking and pin assignments were wrong. Reversed from what they should be. NOT GOOD!! Anyone else notice this? Who should I contact to correct this? Many of the devices in the user library are created by users so don't know if the person that created a particular library entry is the only one that change it (or delete it) or not..... #BugReports#
MarkEm 2023-04-30 04:23:21 comment 1 0 Help & Support
Numerous DRC failures
I'm getting lots of DRC failures on my board. This includes vias I placed/modified AND library components like transistors and capacitors. I could see problems with vias I modified (because the default is a teensy size not suitable for connector wires or thru-hole components), but it's frustrating to get DRC failures from library components like capacitors and the like. Any tips on how to address this would be appreciated. #PCB#
MarkEm 2019-01-30 07:32:09 comment 2 0 Circuit Design
Via connections to ground plane
I have two questions about via connections to a ground plane on the bottom layer of a 2-layer board. 1. I don't see visual differences between a via with NO connection to the ground plane (the bottom side of my board,) and one with connection to the ground plane. Based on another post in this forum, I made the connection by renaming the via's net connection to GND. This makes me very nervous when it comes to confirming the connection. I don't like the idea of spending money on a board only to find the connections weren't made. A preview of the actual board layout would be helpful in this regard. 2. Is there a via option to make a thermal connection to the ground plane? I couldn't find that option. #PCB#
MarkEm 2019-01-30 07:16:09 comment 7 0 Circuit Design
Traces on bottom of board become invisible when placed
As a new user of Easy EDA I find it disconcerting when placing traces on the bottom layer of my board. They disappear as I place them, so if I mess up the routing I won't know it until I exit the Trace mode. Is there a way to make them visible at all times during the operation? This behavior seems inconsistent because traces on the top layer are visible at all times when they are placed. I have done NO customization to my working environment, this is the out-of-the-box behavior. I'm running Ubuntu 18.04 on a Lenovo W530 and the Chromium internet browser. -Mark #PCB#
MarkEm 2019-01-30 07:04:48 comment 3 0 Circuit Design