asdasdasd
Ground planes and correct vias
Hi, First the link:The pcb I have questions about In high frequency circuits (ddr memory...), it is even more important to think about the current return path. In the above link, I decided to create two power planes and two ground planes. Even if one large ground plane would be better, since there is no relation between IC1 and IC2, I think there is no way the current makes big loop and wreck my circuit performance. So a bigger ground plane would only help EMI and heat (which are very important). Am I right? Are my via to PWR and GND correctly put? Thanks a lot, #PCB#
Markl 2018-03-27 02:19:23 comment 3 0 Circuit Design
Sd card: detection switch connections?
Hi, I am setting a schematics with a micro sd card connector. If the 8 pins are clearly understood. The DM3AT-SF-PEJM5 has a card detector. It translates to 2 lines forming a switch. So the sd card connector has 10 pins. Where to/from should these extra two connect? It is a general pcb question as any sd card reader may have it. Thanks #PCB#
Markl 2018-03-14 01:43:37 comment 3 0 Circuit Design
Store multiple inputs?
Hi, What would be the best way to store 50 to 100 different signal inputs, each on their respective copper line for further processing (by the cpu)? I am afraid that a cpu would become unusable pretty quick if I could use that many pins (in the reference I use, the allwinner h3, all the gpio are already used for important function already) Thanks #GeneralDiscuss#
Markl 2018-01-25 23:14:32 comment 18 0 Others
Help me reading this cpu size from datasheet
Hi, I am creating a package for allwinner H3. But I don't quite understand the pin detail Datasheet: H3 datasheet See the last page. The pin pad should be 0.15mm but there is also the 0.08mm value. I see that the numbers may be rounded at two decimals, hence 0.15/2= 0.075 rounded at 0.08mm. But what is this value meaning? Thanks! #PCB#
Markl 2017-11-20 18:30:21 comment 8 0 Circuit Design
European prototyping manufacture?
Hi, Do some of you have a good experience with a prototype+production pcb housing manufacturer located in Europe? I know about 3dhubs, Sculpteo, Shapeways but I find the last two quite expensive for my design (and even for very simple ones): avg 40€/housing (eats all the benefits)!!! Thanks PS: Please no free ad, I want the opinion/experience of actual CLIENTS. #GeneralDiscuss#
Markl 2017-11-17 20:55:19 comment 0 0 Others
When will the pcb assembly service be enabled for Europe?
Hi, I guess the title sums it all :) Thanks! #GeneralDiscuss#
Markl 2017-10-09 17:15:11 comment 5 0 Others
Wifi modules, pcb and fab
Hi, I have a very practical question, looking at pcb fab. First I read the "pcb order" and tutorial pages but didn't see anything related to the use of modules (daughter pcb). How do you deal with wifi modules in the fab? do you solder them? Automatic process? Will I have to do it myself? If you do it, any -components- advices to ease your life (and mine)? Especially as a start, I won't have wifi on the board because of the regulations (FCC, CE..) but as a certified module. Thanks #GeneralDiscuss#
Markl 2017-07-20 17:11:30 comment 3 0 Others
Simulate logic circuits
Hi, I read the Spice documentation and may have missed a tip. Is there a way to force a voltage out of an IC pin( mcu, logic gate..)? Or is my only hope be to use switches everywhere to approach the real world circuit behavior? Thanks Mark #Simulation#
Markl 2017-07-11 04:44:15 comment 6 0 Circuit Design
100-200m laser radar sensor?
Hi, What part would you recommend to achieve a laser obstacle detection of approx 150-200 meters? It should be programmable by a mcu/cpu with no human intervention (no lcd screen needed, just the laser module). I will eventually fit it on a pcb via wire. Functioning temps -20 to 80° or better. Thanks #GeneralDiscuss#
Markl 2017-06-18 14:51:50 comment 6 0 Others
LCSC: lot of parts out of stock.
Hello, I was on your parts website LCSC, and while VERY interesting (lot of choice, low price), so many parts seem out of stock it is deceiving. Is it temporary or do you work in a just-in-time fashion? It is important to know you better, since you fusioned both of these businesses. Thanks #GeneralDiscuss#
Markl 2017-06-11 16:44:04 comment 2 0 Others
Why no voltage drop?
Hello, Can someone explain why in this simple schematic, my voltage between the two diodes is not droping? https://easyeda.com/Markl/toto_alala-W8EWewO5n Thanks #Schematic#
Markl 2017-06-11 05:12:16 comment 4 0 Circuit Design
Adjustable trace length
Hi, Please enable the trace length to be editable. It is important for so many features (ram, other components needing exact timings). To facilitate the implementation, we could think of it that way: 1) user puts a small non terminated wire. 2) edits the wire length. It tells the EE that we want something more from it: a specific length. 3) the wire disappears 4) the user clicks on the portions he want the line to be drawn. These are the leads. Between each lead, the soft calculates the remaining length to go and informs the user. 5) At the end, the user clicks toward the last point and the soft creates the line accordingly, shortening the last segment as needed to respect the required length. If the user messes up, he starts from the last good point again (by clicking on it; those coming next are discarded). It eases your dev time and is very easy for the user as well. What do you think about it? Thanks #FeatureRequests#
Markl 2017-06-11 00:50:02 comment 1 0 Feature Requests
Outsourcing service?
Hi, Could you propose an outsourcing service in which we pass you the initial easyEDA schematic and you would correct it (or even make it from scratch) and manage the manufacturing as well, according to our constraints? Just asking with no direct purpose right now, but that may change. Thanks, #GeneralDiscuss#
Markl 2017-06-10 21:51:25 comment 5 0 Others
Add length matching
Hi, I think trace length matching is important for more complex designs involving DDR. How it could work: 1)"blindly" trace 2) Select the traces you want length matched 3) Enter the length value you want The engine should understand that multiple wires are selected and apply the same length to all. It should do serpentine according to the angle and diameter given below the length in a text box. (Add those two boxes too). That way, DDR layout without other package need (Kicad...) and enjoy ;) If you need more info, please ask Cheers #FeatureRequests#
Markl 2016-10-02 15:21:22 comment 3 0 Feature Requests
DDR trace length matching
Hello, I tried to length match some traces to include DDR3 memory but didn't find any way to do it. Where is this feature/How do we activate it? Thanks #Skill#
Markl 2016-10-02 02:41:12 comment 1 0 Circuit Design