Board Outline
Hello, The pink board outline track has some width. What is used during PCB manufacturing for cutting out the board? The inner, outer or middle diameter of the circle line? regards #PCB#
Keep Out Area - between two circles - Autorouter
Hello, I need to create a "keep out" area for the autorouter. Normally this is done creating a solid region as "cutout". But how can I create such a solid region between two circles? regards #PCB#
Arc and Arc Center - Moves Center
Hello, if you make an Arc or Arc Center (0 to 270), then select it and enter a start angle of 180 the center will be moved. Update: Because there was no feedback to this bug I add 2 screenshots to illustrate the bug. Step one ... use ArcCenter to create part of a circle from 0 (right) to 270 (bottom) degrees Step 2: Enter the value "180" in "Start Angle" .... The value in "Start Angle" immediately changes to "90.0" and the value in "End Angle" changes to 0.0. The origin of the arc moves one unit left und one unit down .... regards #BugReports#
Trace from Bottomlayer appears over Trace on TopLayer
Hello, I have created a new part "JUMPER PAD 5 Flower" as a multi solder bridge with "cut through" connections between the pads. All pads and connections are on the bottom layer. If I add more components and connections on the top layer, the connections of the "JUMPER PAD 5 Flower" from the BottomLayer appear above the connections of the TopLayer. https://oshwlab.com/MiniMax/testprojekt Please take a look. Any hint how to avoid or solve the issue is welcome! regards #BugReports#
SMD JLCPCB Assembly Parts
Hello, I want to order my first PCB with JLCPCB Assembly Service. I only added parts to my schematic which show the "SMD" sign in the category "JLCPCB Assembled". For example the capacitor with part number C106199. Today it shows "379400 for JLCPCB SMT Service" for that part. When looking in the schematics side panel, it does not show "JLCPCB SMD Yes" like the part C185077 for example. When looking at the BOM the column "JLCPCB SMD" and "LCSC Assembly" both are empty for the part C106199. What does that mean now? Will this part be assembled or not? If not, how can I find parts which will be assembled? regards #PCB#
Cannot route self made part. Help wanted.
Hello, I made simple coil (bottom layer) with 2 vias and 2 pads (top layer) and am not able to connect the pads to something. I added a simple diode to show the problem. Autorouter fails and manual routing is not possible. What is the problem? regards https://oshwlab.com/MiniMax/coiltest #PCB#
EasyEDA V6.3
Hello Usersupport, is there any news about when V6.3 will be released? regards #GeneralDiscuss#
How to create a PCB with soldermask and topsilk layers but without copper?
Hello, what is the right way to generate a pcb without copper (no traces, no copper surface), just pcb, with holes, soldermask and topsilkscreen (used as mechanic adapter)? I did one in the last weeks and uploaded it but the audit failed because easyeda did not produce all layers. After some email with the jlcpcb team the pcbs I finally got were exactly like I wanted them. To avoid discussions in the future I would like to know what is the best way to create such boards directly out of easyeda? regards #Skill#
FR: Document layer as default for Measurement / Dimension Tool
Hello, The dimension / measurement tool uses the TopSilkLayer by default In my opinion it would be better if the document layer would be the default. regards #FeatureRequests#
Personal Libraries / Work Space(0) (V6.2.34)
Hello, with version 6.2.34 inside the libraries dialog the section "Personal" has changed to "Work Space". The number behind that shows always 0 like "Work Space(0)" no matter how many entries are found. regards #BugReports#
Time schedule for V6.2
Hello, can you estimate when V6.2 will be available for testing? I am holding back some projects because I think they can profit from the announced improvements in V6.2. regards #GeneralDiscuss#
PCB: Import Changes
Hello, it would be nice to have the option to select the compontens which should be imported to the pcb in the "Confirm importing changes information" dialog. Sometimes I put diffent components into one schematic and make 2 or more different pcb variations out of it. It would be helpful to select component to import into a specific pcb or in general. So I do not have to delete them every time. regards #FeatureRequests#
V6.1.52 -> V6.1.51
Hello, I am on version V6.1.52 in my browser and on the desktop version. Today I started the browser and it showed the popup that a new version V6.1.51 was available, but I refused to switch. Bug? regards #BugReports#
Ratlines hard to see
Hello, Ratlines are sometimes hard to see even if their color is changed. Is it possible to increase their thickness (or make it adjustable)? regards #FeatureRequests#
Text Alignment off on rotated NetPort Names
Hello, I am not sure if this is intented behaviour. https://easyeda.com/MiniMax/netport_problem There is also a bug with left / right alignment. But I am not sure how to reproduce it right now ... regards #BugReports#
Solid Area Routing Angle "Arc" behaves different than Arc on track
Hello, the solid area routing angle option "arc" uses a different radius than using arc under track. I understand that solid area needs to force a closed form, but that would work with a "track arc" behaviour as well. #PCB#
Adding a single 2 sided Keepout Area makes it unable for autorouter to get 100%
Hello, EasyEDA: 5.9.34 Autorouter: 0.8.1 The autorouter is able to get 100% with a simple PCB. After adding a single double sided small KEEPOUT area (solid) which does not interfere with routes found before, it is no longer able to get 100%. regards Carsten #PCB#
PCB Thumbnail in User Center still shows old graphics
Hello, in User Center / My Projects the thumbnail graphics from my PCB shows an old PCB Layout. How can I update the thumbnail to the actual layout? I renamed the PCB in the editor under projects during the process. Maybe this confused the thumbnail preview ... regards Carsten #BugReports#
Switched from Eagle to EasyEDA and am very happy!
Hello, looking for an alternative to Eagle I recently fund easyeda again. EasyEDA is so clean and easy to use that I managed to adapt to it in a single day. Thank you very much for developing this piece of software (and the autorouter is already great too)! best regards Carsten #GeneralDiscuss#