Any way to export a PCB layout as an SVG without a 2.802mm offset rectangle?
When exporting a PCB layout, all options I've tried export the board offset within a 2.802mm rectangle path. Additionally I tried DXF, and that seemingly exports with the wrong scaling so is even worse. Is there any way to export in vector format such that 0,0 is the corner of a board, and if a board is W,H mm, the document size (outermost path) will also be W,H mm? If not, can an option be added to the export/save dialogs so that this augmentation can be disabled. #PCB#
Any way to export a PCB layout as an SVG without a 2.802mm frame?
When exporting a PCB layout for reference or other purposes, such as laser cutting a template, all options I've tried export the board within a 2.802mm frame. Additionally I tried DXF, and that seemingly exports with the wrong scaling so is even worse. Is there any way to export in vector format such that 0,0 is the corner of a board, and if a board is W,H mm, the document size (outermost path) will also be W,H mm? If not, please can a frame option be added to the export/save dialogs so that this augmentation can be disabled. #PCB#
Seeking efficient way to create T junctions and spurs with fillets
I'm wondering as to what the best workflow is for creating T junctions and spurs with fillets. The teardrop tool doesn't handle this, and neither does the alternative extension for creating teardrops. So something like these. The second is a bodge but just to illustrate one solution for all > 90 degree angles. With the first I created a triangle and copy paste that, but it's a pain to align perfectly, and the alignment tools don't really help because they don't appear to follow the convention of the first selected item being the anchor. At least, in the first case, whether I selected the track first or the triangle, doing a vertical centers alignment shifted the track and not the triangle region. So I had to turn off snap and nudge it. Some argue that right angles really aren't an issue any more, though aesthetically it's nicer to have fillets and buys some safety just in case. Is there any better, preferably automatic, way than manual triangles, copy paste and shunting them around until they look "good enough". #PCB#
Align to grid and snap give different placement for SMD part. Can they be made consistent?
My settings are grid/snap size as 50mil, alt snap 25mil. Having placed an R0603_L1.6-W0.8-H0.8, if I do an align to grid the part always moves by a small amount. After that, if dragging the part it resnaps as expected and is now no longer aligned to the grid. In contrast, a dip package snaps and aligns as expected. Is there an option or settings recommendation other than using an order of magnitude finer grid/snap for the grid and snap calculation to be consistent? #PCB#