Top layer traces appearing under bottom layer.
I have been making a pcb with thick copper traces on the bottom layer created by impoting an image ,and they appear as blue areas when the bottom layer is visible. But then any top layer traces appear to go beneath them. I have drawn some traces to show what I mean. It's not important unless it means that my board won't be fabricated properly. #PCB#
Pcb track to component connection.
I have a PCB that has checked ok in DRC check , but there is one thing I'm wondering about before I send it off. In the schematic designer , if you put a component over a wire it will connect automatically ,but I'm not sure if that's true of the PCB. There are some places on the PCB I have moved or changed components/traces and just positioned the component's connection hole over the trace rather than draw a new trace. It looks ok and as I say it checks DRC ok but is it actually going to fabricate properly or do I need to go back and check that every component/trace connection in the middle of a trace has a little dot in the middle? #PCB#
Delete all component text on pcb
I'm trying to delete all the component text on a finished pcb , but "Global Delete > Text" doesn't have any effect. Am I missing something? Thanks Oli #PCB#