Designator Error when trying to process BOM & Pick & Place files to JLCPCB for assembly.
Hello I get this message when trying to process uploaded BOM & Pick & Place files to JLCPCB for assembly : Any help will be much appreciated :) Thanks! #Others#
A weird one, Chip is 90 degree's out of position to pads.
Hello.....again :) Have imported a components from the Library and found it to be 90 degree's out of position to the pads (see image below). Is this easily resolved? I had this before a long time ago and they just manually adjusted it on production but wondering if there is a way to correct it in EDA? Thanks Ron #PCB#
Need to remove and isolate specific wires from a NET or NETS in Schematic, just cannot find the solution.
Hello Everyone :) I've not used Easy EDA for a couple of years, returning after a break and having problems with NETS. The design below for some reason ended up having various wires connected to the same NET. In other design programs you just select the wire and give it a new NET NAME and hey presto it gets isolated but in EasyEDA i cannot find this option. I'm wondering if this feature is only available in the PRO version unless i've missed something in the Standard edition which i'm using. The power connections +3.3v and ground are on the same NET and the wire between Pin.3 of Con.1 and Pin.6 of the large IC should also be on it's own Net. Any help on how to separate these wires into separate Nets / Networks will be much appreciated Ron #Schematic#
Can someone please help me sort out this mess? All nets connected and cannot separate.
Hello I've not used Easy EDA for a while and just cannot get my head around this problem. For some reason, i have a number of wires on the same net and i cannot find a way to change the net names to separate everything.. Normally with commercial PCB design tools you just select the track and change the net name but i cannot do this with EDA. Has the change net names been moved to the PRO version or something? Any help much appreciated. Ron #Schematic#