Help with setting up PCB to have a castellated part put on it
Would like to please ask for a second set of eyes to see if I've done this is a workable way ... I just spent a bunch of time trying to define a schematic/footprint to allow me solder a castellated board onto a pcb. Here is the castellated board that I want to solder onto my PCB: https://www.tindie.com/products/jaspersikken/solar-harvesting-into-lithium-ion-capacitor/ In trying to get this to work, there was for me a lot of trial and error - and I'm not even sure I could recreate it now if I had to - but I think it may have ended up right. I wasn't able to figure out how to share the part (schematic and footprint) I built, but I could create a project using it and share that project, which I have done here: https://oshwlab.com/roblatour/weather-station-2024 I would appreciate it if someone could look at the above project and tell me if it will work. In short, the idea would be to solder the castellated board onto the exposed copper slots on my PCB and then have the slots connected using the Vias at the end of the slots to other components on the board. The one thing I am most unsure of, will the via at the end of the slot be continuously connected to the slot, so that if I solder the castellated board on the slots there will be a connection all the way through to the via at the end of the slots. #PCB#
How to remove unwanted pin holes in the PCB part?
This is the part that is being placed on my board: Here is how it is showing up on my PCB However, there are only 8 pins on the part, so I only want 8 of the 16 pin holes placed on my board. How do I get rid the unneeded extra pins in the footprint manager (if that is where it is done)? #PCB#
A Ruler for measuring pcb layouts
Several years ago I wrote a freeware program called A Ruler for Windows; it lets you measure things on your screen in pixels. You can have multiple rulers open on your screen at once, and they can be transparent if you like. In any case, as I am now starting to design PCBs with Easyeda I am finding this tool invaluable. If you're interested, you can download a copy from the website - just google "A Ruler for Windows" and it should come up as the top result (assuming no ads). Unfortunately, as the name implies, it only works with Windows. Hope it will be of help to you. #PCB#
Is adding female headers over another part, ok ? / cause auto-routing to fail
I am designing a board that has a part on it which I will supply myself\, it is an ESP32_DOIT_V1 board. Accordingly\, I found a great template for the pins associated with this part called "ESP32_DOIT_V1" and placed it on my board and made all the connections in the sketch just fine. The part puts two rows of 15 pins on both sides where the ESP32 board would be soldered into the board I am designing. However, rather than me having to solder in the ESP32 board onto the board I am designing, I would like to have assembled onto the board I am designing two 15 pin female headers (to go into the holes where the ESP32 board would otherwise be mounted) so that when I get my board the female header pins will be assembled onto it, and all I will have to do is plug the ESP32 board into the female header pins (i.e. no soldering required by me). To this end, I found this part (LCSC C124408) which is the 15 pin female header needed on both sides of the ESP32 board. So what I have done is I've designed the PCB with the ESP32_DOIT_V1 template on it\, and then carefully positioned the LCSC C124408 parts over where the ESP32 and Female pin headers are. Having this said: 1. Is this the right way of going about that - or is there another way? Of note, I had thought about just adding something in the comments, but it seemed that I need to put the header pins someplace on the board so that they could be added to the BOM and the PCB finished off. Accordingly, this is the only way I could figure to do it. Again, is this correct? 2. Also\, as an aside\, I noticed that when I do this (put one part over another)\, it causes the AutoRouter feature to fail with divide by zero errors\, and with it all my routing is lost. (The work-around appears to be to first auto route the board with the header pins moved out of the way, and then place the header pins over the holes after the routing has been done) and never auto route again. So this point, number 2, is not so much a question as it is a Bug Report. With thanks in advance. #PCB#