asdasdasd
I find just one Arduino, Arduino Nano; I need Arduino Uno
In the title all the info. I rewrite: I need to have Arduino Uno but I'm not able to find it. Thanks in advance. Dario #GeneralDiscuss#
ScalaAccaZero 2022-08-27 00:27:14 comment 5 0 Others
PCB with NO WIRES
My schematic has about 6 16-pin ICs, 18 capacitors, 36 resistors and the routing of the connection cables (THT format). I had the PCB made at a company where I worked (I'm the retired IT) and ... no wires in the PCB! I had looked at the PCB in 3D view (VERY COMFORTABLE!) without seeing the wires, neither in the component side nor in the soldering side. I thought it was the way to show me only the components and the holes, assuming that the connection wires are there. Instead the wires just there is none! I searched the manual and the forum, without finding help. I can attach the gerber, but ... I couldn't attach it. HELP! #PCB#
ScalaAccaZero 2021-10-23 22:13:09 comment 35 0 Circuit Design
Modify PCB automatically
Hello everyone! I read FAQ and Forum: some asks about changing a component (as example:away a resistor and a new resistor exactly in the same place) and then "Update PCB", "Remove old resistor, insert new one? Ok". But I don't understand if there a setup so that the position in the PCB remain unchanged; no problem in replacing the new component. But I think that there is a setup like " Place the inserted component in the same place of the removed one", but I do not understand where it is. Excuse my poor english (very OK having EasyEDA in italian!). Thank you very much indeed, Dario #PCB#
ScalaAccaZero 2021-09-22 22:19:41 comment 4 0 Circuit Design
How to use autoplacement
In "PCB Layout", "Help: component autoplacement into PCB", you can read my request. Immediate response and of great help to me. Handyfierman asked to insert the PCB I asked for help for. I attach my PCB: I have placed the 6 components in the center and the 6 cable connection points at the edges by hand, as I need to be in this position. Then I will position the others, only by moving them within the board. In "https://usuaris.tinet.cat/fmco/s88_en.html#S88", you can see the wiring diagram and the board I started from. For any other questions, I'm here, Dario #PCB#
ScalaAccaZero 2021-07-18 20:59:37 comment 1 0 Circuit Design
Help: component autoplacement into PCB
I am very beginning to use the very rich EasyEDA. I started using it for a public, simple electronic circuit. First I drew the electronic circuit: everything is fine. I had the PCB generated, then I started placing the components by hand; in the PCB I cannot distinguish left-right and top-bottom of each component. So I thought about using the "Component autoplacement into PCB" I need to place only two components (JP1 and JP2); all the others can be positioned by EasyEDA in an optimal way to optimize the PCB. On the website "https://easyeda.com/forum/topic/Component-autoplacement-into-PCB-3f0f310db0d74a9bbf848953c4c8048d" I read about the "Component autoplacement into PCB". I used "CTRL + SHIFT + X", but ... nothing happens! Obviously I did something wrong, but I don't know what. I can't go on: I need help! Thank you, Dario #PCB#
ScalaAccaZero 2021-07-15 05:00:53 comment 6 0 Circuit Design