Easyeda Pro delete track node
Hi, I am converting to EASYEDA Pro and I cannot work out how to delete a track node? In Easyeda you could double click to add or subtract a node or right click and select delete but that no longer works, but the only 2 options are MOVE or INSERT ? Any ideas please? #PCB#
Changing component manufacturer?
I want to change all components of the same type to be from the same manufacturer for assembly without remaking the PCB layout? While laying out the schematic I chose components from the library at random because at that stage I only needed the correct PCB footprints. Now I am looking to mass produce I have downloaded the BOM and noticed that instead of having for example C1,C2,C3,........C16,C25 all being 0805 100n caps as a group type - I have many individual manufactuers and suppliers. So I just want to change them ALL to be the same type and from the same manufacturer so I can use 1 reel 0f 5000 instead of 10 differents reels from different manufacturers. I tried to change this in the schematic but when I import design changes it places the new components off the board or another way that changes the component doesn't change the BOM but shows 2 identical lines on the BOM? Any ideas/help please? #Others#
How do I change/update a component footprint in a PCB only design?
Hi I have a laid out a board and have no schematic since it is just a repetition of 3 leds and 2 resistors. There are a lot of them and they are on complex shaped boards. After the prototype was made the client has provided the LED from a different manufacturer that has a different footprint. I therefore just want to change ALL the LEDs from one part and replace them with the new part which is identical except for the SMD footprint. Is there a way of changing ALL the LEDs from one type to another? I also want to change ALL the resistors from 0603 to 0805? Any ideas please?? #PCB#
Cannot add track??
I have completed my schematic and PCB layout, I began to add tracks but found in certain places I cannot add any track?? I have a row of headers on a 0.1 pitch and the centre row of pads are common (VCC) and need to be heavy (2mm) I selected add track (W) and bottom side (B) clicked to add track and I can see a blue dot for the start of the track is added but it won't let me extend the track out of the pad?? i have tried altering the snap and grid sizes and the track width but it makes no difference? If I select a pad on the end of the header it allows to add track?? What am I doing wrong?? Please help!! I have added a screen shot of the connector and you can see it has allowed me to add one track along the centre row - but it wont allow me add the next piece of track to the right?? #PCB#
Library Search ?
Hi, Apologies as always if I am being stupid or have missed something obvious or already covered?. But believe me I have searched. Is their a way when searching the libraries that certain conventions can be used? i.e. If I wish to search for A PIC in a 28pin SOIC with 4 PWMs .... etc.... that I can select the library to ONLY return results that ONLY contain ALL of the search parameters rather than anything that contains any part of my search? This would make search so much quicker and easier. i.e. to say enter 28&SOIC&PIC&PWM&16Fxxxxx etc.... ?? I use searching software for other applications that does use this convention and it is super easy to get the correct results from millions of possibles. I tend to start with ALL parameters selected and reduce the number of parameters if no results are returned. Any advice or ideas will be appreciated and may save myself and others days of searching. #GeneralDiscuss#
Partial Assembly
I am looking at submitting a design for assembly. I can find most of the components in the JLCPCB stock list but some are either missing or out of stock. Can I submit a design and have it assembled omitting the parts that are unavailable so I can add the missing parts manually?? #PCB#
PCB changes to schematic?
Hi, Apologies if I have missed anything in the manuals and instructions but I have spent a considerable amount of time searching. I need to know if there is a way to make changes to the PCB layout and make the schematic update with the changes? i.e. If I add a second connector or a decoupling cap somewhere etc... ?? #PCB#