asdasdasd
Are 0603 LEDs reversed from other sizes
I just tried to place an 0603 red LED from the easyeda pro common library, and I was surprised to see that their footprints seem to be reversed from the others. You can see that in the schematic both LEDs appear to be in the same direction, but in the PCB they look to be opposite. In 0402 and 0805 LEDs, pin 1 is the marked side, and pin 2 is the flat side; but in 0603 only green has this orientation, while red & blue are reversed. Am I missing something here? Or is this a bug, and if I want to use an 0603 I should always place as green and assume the other colors are currently broken? update I double checked against a project I previously built with easyeda std and some LEDs from my collection. My LEDs, the 0805s from std and the 0603 from pro all seem consistent, with the pointed part of the footprint's silkscreen and the green in the component or 3d model pointing to the cathode. The 0805s on easyeda pro are reversed, with the pointed end of the silkscreen & green dot on the 3d model pointing to the anode. So it appears that the easyeda pro 0805 LEDs in the commons library are reversed. For now, I guess I'll work around it by placing an LCSC part instead of the common one. Part C9900012722 seems to have a good footprint & model. #Library#
SteveSanbeg 2025-10-27 08:49:31 comment 4 0 Circuit Design
easyeda pro limited support for resistors & capacitors
One of the projects I'm currently working on doesn't require a dev board, and is mostly components which would've been in the common library in std. But it does need a few resistors & capacitors, and there seems to be a surprisingly limited selection in the pro common library. For example, I haven't been able to find any of the following: Resistors with US schematic symbol 0805 SMD resistors (although it seems most other sizes are there) Any through hole capacitors; I wanted to include an ecap, but I noticed that ceramic disk are also abscent. Is there something I'm missing for these basic components? #Library#
SteveSanbeg 2025-05-25 22:38:53 comment 2 0 Circuit Design
Please add save all feature
I tend to have a lot of tabs open at a time, as a play around with different projects and different PCBs in each project. I want to be careful not to use work, but currently it's tedious to go to each tab to save them individually. I've also noticed that sometimes the save button is disabled, i.e. saving a tab may disable it, then going to another tab which isn't save may leave it disabled. I'd feel more confident if there was a menu option that would save all open tabs. #FeatureRequests#
SteveSanbeg 2020-11-24 09:04:54 comment 0 0 Feature Requests
mark pin 1 with a triangle
I understand that it's common for a PCB silkscreen to include a small triangle pointing to the first pin of each multi-pin header, and possibly to other parts which could be inserted in the wrong orientation. It would be nice if there was an easy way to implement this in EasyEDA, #FeatureRequests#
SteveSanbeg 2020-11-14 07:27:41 comment 5 0 Feature Requests