component with multiple parts
Im doing an audio input board with 8 identical channels. it uses 2 TL074's. Is there a way to draw it once then copy and paste if for the other 7 and have it either automatically update the 4 amps in each package or do it from attributes after. example the draw it with IC1.1 then have it advance through IC1.2, .3 and .4 then move to IC2.1 .2 .3 .4 without having to get each section from the library and place them? thanks #Schematic#
copy paste
I have an amplifier board with 8 identical otputs. Is there a way to draw one then copy and paste it 7 more times and make the part designations line up with the schematic? #PCB#
router
is there a way to define an area that the autorouter works in and leaves the reast of the board alone? #PCB#
Schematic Module
is there a way to make a schematic module show up in the form of a component to place it on a master sheet. I am making an audio driver that has 8 identical output amplifiers. I would like to draw it once and make a module with pins so I can just place them on the sheet. then when it annotates it will give each component in each module a unique designation to go to the pcb. It makes the master drawing much smaller. the individual modules look like components with input and output pins. an example is in Orcad when you place a sheet on a sheet. #Schematic#
delete one segment
How do I delete the just the segment from A to B without deleting the whole 5 volt net. when I click just that line the whole net through the whole schematic lights up #Schematic#
Orcad Schematic
?is there a way to import components, drawings or Netlists from Orcad schematic? #Schematic#
Ultra-Librarian
Is there an Ultra Librarian format that EasyEDA can read? #Schematic#
cs8416 csz
I need to add CS8416 CSZ to a schematic drawing which is 28 SOIC. The library has the CS8416 CZZ which is 28 TSSOP. The pinout is the same. IS there a good way to add a second footprint to an existing device i.e. the CSZ footprint to the existing CZZ part? #PCB#