asdasdasd
Two different PCBs with SMT assembly, in the same panel.
Hello good people! I need some help getting this working, because as of now I can't get around this issue. I have a PCB designed according to a schematic, but I also designed an "Auxiliary" PCB that is connected to the Main PCB through PH connectors. Like this: Top PCB: Main Bottom PCB: Auxiliary (made it from scratch, is not included in the Main schematic) So I want to connect those two PCBs with a V-Cut or Stamp-hole so I can order all of this in one go. I contacted JLCPCB online support, they told me I had to Panelize and ONLY use STAMP-HOLE, because V-cut + SMT assembly isn't supported. So I did the Panelization, and I got this instead: As you can see, the Stamp-hole is in the wrong position, It should connect both PCBs at the point I marked. I can't move (or dont know how) the stamp-hole to go between PCBs. What am I doing wrong? Please help. Thank you! #PCB#
Tone Electronix 2021-12-13 18:35:39 comment 8 0 Circuit Design
Making a faceplate - exposed copper issue
Hello! So I am trying to do a faceplate using text and graphics, exposing copper in a PCB, and I have some issues (and lack of knowledge). I found this topic (https://easyeda.com/forum/topic/expose-coper-of-text-object-8a343e5137464bf997da75568d7ff2e7) and this is what I did: 1- the faceplate is this, three holes for potentiometers (grey ones) and outlines in purple. The text and symbol I am testing: 2- so I added 2x copies of each text AND graphic. One of each to "Top Layer": 3- and the other on "Top Solder Mask Layer": Now the question is, what do I do next?? Mind that this is not a "electronic schematic", it's just a design. Should I add a "net" (GND for example)???? Thank you for your help! #Skill#
Tone Electronix 2021-10-04 07:16:09 comment 2 0 Circuit Design