asdasdasd
Smaller corner radius on internal cutouts?
I ordered a PCB from EasyEDA in late 2016. The project is here: https://easyeda.com/TyeEasyEDA/Boomerang_Keyboard-a2d4e41a4fbf4da490f883c4b93fd55c . As you can see, it has a large number of internal square cutouts for small RGB LEDs. The footprint for these LEDs was tested by another user who received samples that were perfect. His LEDs fit the square cutout perfectly and the internal radius was very sharp and tight. When I received my PCB, the LEDs do not fit without extensive filing because the corners are too rounded. Before I order v2.0, is there a way to designate a smaller drill bit or radius like the original samples had? #GeneralDiscuss#
TyeEasyEDA 2017-02-15 10:02:49 comment 1 0 Others
Cannot rename file title in project
Problem: Cannot rename a PCB that already exists in a project. Steps to reproduce: Hover over your username then click on "My Projects" in the box that appears. Click on the options icon (the one with three stacked lines) -- the files in that project will expand into view. Click on the pencil icon next to a PCB -- a pop up box with the project's information will appear. Edit the title. Click submit. (The submit button says "t'i jiao" in the English version, by the way. Missed a translation, here) After clicking submit the new title is not shown anywhere. It does not replace the existing title. #BugReports#
TyeEasyEDA 2016-12-22 07:06:35 comment 1 0 Bug Reports
How do I ensure edit tracks are horizontal, vertical, or 45 degrees?
Example: If I create a track that is horizontal, then double click it to create new points, then move those points to route around something, How do can I verify or force the new and old tracks are only horizontal, vertical, or 45 degrees from vertical? #PCB#
TyeEasyEDA 2016-12-09 04:32:01 comment 2 0 Circuit Design
Help a beginner with Auto Router error?
I'm trying to minimize the forum posts to when I'm truly stuck but, as a learner, I hit a stopping point here. I'm trying to use Auto Router on this board: https://easyeda.com/TyeEasyEDA/Boomerang_Keyboard-a2d4e41a4fbf4da490f883c4b93fd55c I keep receiving this error: Track width cannot be less than DRC setting value. The board would Auto Route for awhile but stopped after I did a lot of work on it. I don't understand what causes this error. I have searched the forums and tried to get it on my own, but I need to ask for help now. As always, any input or learning material is appreciated. #PCB#
TyeEasyEDA 2016-11-11 07:14:58 comment 4 0 Circuit Design
Can EasyEDA fabricate this? Rectangular cutouts
I plan on having EasyEDA fabricate this board when I'm done designing it. After looking through a couple of other posts about rectangular pads I'm still not confident that I did it correctly and that EasyEDA can do this. You can see my project here (I've made it public now): https://easyeda.com/TyeEasyEDA/Boomerang_Keyboard-a2d4e41a4fbf4da490f883c4b93fd55c There are 48 rectangular cutouts that I need to insert tiny programmable SK2812 LEDs in to. Each cutout also has 4 pads around it to solder-glob the LED into place. Did I represent this cutout correctly? Can EasyEDA make this as shown on the board? (or is there a more correct way?) Thank you. #PCB#
TyeEasyEDA 2016-11-08 14:04:54 comment 1 0 Circuit Design
I'm confused - How to associate footprint with schematic
I accomplished what I want to do in Kicad but I'm horribly confused about how to do this in EasyEDA. PCB design is new to me so please explain in simple terms. I am trying to create a PCB for a mechanical keyboard. I need(?) a specific footprint with two plated through holes in it for the keyswitch. Additionally, this footprint needs a small square hole in it with four surface pads. This square hole will hold a tiny LED. The four solder pads will provide current/data and hold the LED in the square hole. I created a component with six pins, two for the switch hole plus four for the square pads. Additionally, I created a footprint with the proper dimensions for the PCB. You can see my schematic and footprint by searching for Matias in the EasyEDA parts. They'll show up as something like Matias Keyswitch with SK6812 LED. How do I get these two files to know they are related when I convert my schematic to PCB? Thank you. #PCB#
TyeEasyEDA 2016-10-29 15:32:52 comment 1 0 Circuit Design