asdasdasd
Declaring planes on 4 layer board
I reverted to a saved copy. I need to know how one declares a layer as a plane. I deleted everything on each layer except the holes left by vias and multi layer components and am still told I need to delete objects to convert to a plane. There are no objects left unless holes are objects. I even took all GNDs and blanked the net names so no nets were left as GND on these layers. Please start by explaining how this is supposed to work. #PCB#
WellSight 2023-10-05 04:13:10 comment 1 0 Circuit Design
Copper layers
On attempting to name layers as planes I have managed to eliminate the copper on 3 and 4. Layers 1 and 2 still have copper and can "Rebuild copper layer" But 3 and 4 will not. In what setting panel or tool can I put these layers back. They are still mentioned on the layers and objects tool but are invisible I previously was told to delete objects before I could re-assign layers as planes as opposed to signal layers. This didn't work #PCB#
WellSight 2023-10-05 02:27:31 comment 3 0 Circuit Design
Converting a signal layer to a plane
I need to convert 2 signal layers of a 4 layer board to planes. One a ground plane the other a power plane. When I attempt this in layer manager I am told to delete all of the objects of this layer first. I thought I did this, but must have missed something. Please explain. #PCB#
WellSight 2023-10-03 21:31:08 comment 5 0 Circuit Design
Ethernet on 4 layer board
Need "stitching" caps between power on 3rd layer and GND plane on 3rd layer without including other layers. Can I have limited length vias or do I need to remove copper on layers 1,2 & 4 so vias only touch layer 3 PWR and layer 3 GND plane? My signals and PWR are not directly above each other as in photo I do not want vias piercing other GND planes #Skill#
WellSight 2023-09-30 04:55:23 comment 4 0 Circuit Design
Which footprint format should I download?
Which footprint format should I download and how do I import it to my footprint library? (copy paste into 'New Footprint" designer form?? Altium Circuit Studio Design Spark Eagle Easy PC (most obvious choice) eCadstar CR 8000/5000 I created one from Mfr's PDF which showed no locating pin hole while Snap Eda's image seems to have one. Would like to try it. #Skill#
WellSight 2021-09-29 13:53:42 comment 3 0 Circuit Design
Differential routing
Would like to know how to set trace width and distance between traces for differential routing. EASY EDA seems to choose its own spacing Took many tries to get trach length tuning to work. Had to enable real time track length display. Would also like information on via size choices as I am now doing smaller footprint and pad sizes. Thanks #Skill#
WellSight 2021-09-28 13:23:55 comment 3 0 Circuit Design
Objects on gerbers not found in designs , cannot delete in designs
I keep getting objects in Gerber files that are not in PCB designs. Some can be deleted in gerbers (though remain when creating new Gerbers) Some cannot be deleted in Gerber and remain in Photo version, but cannot be found in PCB design. #GeneralDiscuss#
WellSight 2021-06-11 02:39:37 comment 9 0 Others
Ground plane exposed
Two areas where ground plane is exposed. This is only card with this flaw. Not a big problem next to hole in card. Potential problem next to Xtal Osc pad. #PCB#
WellSight 2021-04-04 06:04:45 comment 1 0 PCB
Ground plane exposed
Two areas where ground plane is exposed. This is only card with this flaw. Not a big problem next to hole in card. Potential problem next to Xtal Osc pad. #PCB#
WellSight 2021-04-03 04:31:41 comment 1 0 Circuit Design
Error on circuit cards
Received cards and see an error. This "error" appeared on the Photo version, but IS NOT in the design. You will not find it on any layer or in the Gerber files either.See attached image Circled artifacts are NOT in the design on any layers. I noted this in "2D" image but assumed some bug in application as I could not find it in the design stage. Assumed you would not include it in the cards. Since I could not find it I could not delete it. #PCB#
WellSight 2021-04-02 04:26:27 comment 4 0 Circuit Design
Unable to change names
Many times names of traces will not change and today I can rename a pad to "GND" but "Rebuild Copper Area" does not "Ground" that pad on any of the four layers. I "Placed" a new footprint and that same pin will NOT "GROUND". I have saved and closed, shut down the app and still no "Ground" on that pad. All the pads on that footp[rint are identical. Others ground, but not this one. #BugReports#
WellSight 2020-09-12 23:53:20 comment 1 0 Bug Reports
Online and Offline won't open my projects
I switched to EASY EDA offline mode and am now told I cannot open online projects in offline mode so I switch to offline mode and am told cannot open online projects in offline mode! WHERE is my work? #Skill#
WellSight 2020-08-30 03:31:20 comment 13 0 Circuit Design
Moving to new PC
How do i OPEN EXISTING PROJECTS ON NEW pc? Why can't I find my work? These "upgrades" have made it very difficult to find my work #GeneralDiscuss#
WellSight 2020-08-14 11:12:22 comment 14 0 Others
Artifact on PCB and in HTML
I have a defect on my PCB. It is a small trace path missing copper. S$133692 appears inside it. I found it in "Inspect Element", and deleted it, but it returns when I close file. How do I save the delete? see attached jpg. #PCB#
WellSight 2020-05-19 06:32:18 comment 5 0 Circuit Design
Top silkscreen and board colors
Can we get the Top Silkscreen in Black? How close are the "3D" image board colors to actual finished board colors? I'd prefer a brighter blue. Thanks. #GeneralDiscuss#
WellSight 2019-07-12 11:28:13 comment 10 0 Others
Add ground plane layers to existing 2 layer design
It appears we might need a ground plane layer just for USB differential pairs layout. Can we "insert" two more layers between existing layers? Put USB traces on upper and leave lower blank ( save for vias) for uninterrupted ground plane. We currently have two ground plane layers. #PCB#
WellSight 2019-05-22 01:50:50 comment 1 0 Circuit Design
Opening PCB
When I open one of my PCB layouts it's 500 mm from the card image and I have to Zoom/scroll to get to the PCB image which is at 0/0 coordinates. I have set "Canvas Origin" to 0/0 and it does not help. Or I am doing something wrong. Not a major issue, but a real inconvenience. The other PCBs don't act this way. #GeneralDiscuss#
WellSight 2019-05-03 02:02:37 comment 8 0 Others
Protecting designs
I want them to look and advise, but not edit or delete accidentally or otherwise. Will the "observer" status attain that? Thanks! #GeneralDiscuss#
WellSight 2019-03-27 00:02:38 comment 3 0 Others
Track drawing
The instructions don't work for drawing tracks. I click on a point and the track begins (but NOT colored like in the example) I drag the mouse and a track is drawn, but when I click again it disappears and the rat line reappears. If I draw a new track it is not visible until I mouse over and can see it but it disappears as soon as I move the mouse. If I double click it appears, but disappears when I click somewhere else. Why does this NOT behave like the Tutorial? #PCB#
WellSight 2018-10-08 00:23:38 comment 3 0 Circuit Design
Solder pad layer
It appears all my solder pads have moved to the bottom layer from the top layer. The outlines for all components are still on the top layer but you see no solder pads. Click on "Bottom Layer" and all the solder pads appear. How could that have happened and how to undo it? #PCB#
WellSight 2018-10-05 04:08:36 comment 6 0 Circuit Design
Grouping components and moving them
How to group an area and move everything in it? #PCB#
WellSight 2018-04-11 01:28:17 comment 2 0 Circuit Design
Saving designs
I am unable to save and reopen work. What EXACT steps are required or is something wrong? #Schematic#
WellSight 2017-05-05 01:57:32 comment 3 0 Circuit Design