Changing a footprint’s origin without editing the part itself
I mostly prefer that the footprint’s origin to be set to one of its pins (preferable pin #0) rather on its border, corner etc. That’s because the pads are the part’s reference points which should be snapped to the grid, a least this approach is the obvious one to me. Unfortunately there are many parts in the library where this condition is not true, that is, the footprint’s origin is set to one of the part’s corner instead. Is there a way to fix this issue from PCB layout window, without editing the original footprint when placing (that is, creating a custom user component just for the sake of having proper origin)? Maybe a dialog box for Move footprint’s origin by x, y. Sorry if this is already implemented, I’m rather new on EasyEDA. #PCB#
How to place a simple pad in Schematic capture?
Sometimes you need that a track to get ended in a simple pad. By example you want to connect a buzzer or other external element to the PCB using a wire soldered to the respective pad. Or, let me give a better example: if _Arduino Nano _was designed in EasyEDA it would have exactly 30 of such simple pads on across the long edges of the board (speaking about no header version). But I cannot find a direct way to do this. If you use the Pin wiring tool you’ll end up in an Unfinished net error. The Net Port is for another purpose, as far as I know. If you place a fake component like PINHD-1X1 (which ultimately has a single pad as footprint) you’ll find unnecessary items in the Bill of materials. So, is there s correct and direct method for this, not just an indirect workaround with specific weaknesses? I simply don’t believe I would be the first person who faces this problem. #Schematic#