asdasdasd
How to make a multi-part schematic symbol across multiple sheets?
I have a component with many pins. I want to place some pins in one rectangular schematic symbol and the other pins in another rectangular symbol, and I want to place the two symbol parts on separate schematic sheets. So far I have managed to create a component with these two schematic symbol parts side by side, and I can place this on one schematic sheet. But I cannot drag one part without moving the other, and I cannot move one part to a different sheet. Furthermore, tracks I attach to pins to the inner sides of the component parts seem to become attached to the symbol and can't then be edited. Can this be done? #Schematic#
acutetech 2020-11-25 04:43:14 comment 2 0 Circuit Design
All tracks vanished, but still present in exports
I had almost finished a design and was design-rule checking. I changed the minimum via hole size constraint to clear DRC errors relating to hole size errors. The next time I looked at the PCB, all the tracks had vanished. Pads, silk screen, GND plane etc are still visible. If I use the camera view, or 3D view, or export the design as Gerbers, pdf, png etc the tracks are correct and visible. I tried exporting the design as a json file and re-opening the json file - no difference. How do I restore the tracks? I attach screen shots of the PCB view )tracks missing) and the photo view (tracks present). I can send the PCB json file if someone can fix it. Thx - Charles #PCB#
acutetech 2020-02-28 15:05:09 comment 4 0 Circuit Design
GND tracks have disappeared
I had almost finished a design (small 2-layer board) and was doing final checking and creating GND plane on the bottom layer. The GND tracks on the top layer are now invisible. They seem to still be present in the design, just not visible on the top layer. If I create a track on the top layer (or bottom layer) then it is visible until I rename it GND. Then it becomes invisible. If I rename it something else it becomes visible again. Fortunately I saved a copy shortly before and it appears OK. I attach two screen shots of the same board area. How can I get the GND tracks visible again? #PCB#
acutetech 2019-10-31 02:57:58 comment 1 0 Circuit Design
Panelising boards with castellated pads
I have made a small board (a Bluetooth radio module, 23mm x 13.5mm) with castellated pads (half-cut holes) on three of the four edges. I submitted this to your PCB Order system with a request to assemble them as a panel, but it looks like they can't make them (email says "If half-cut hole, we don't support panel size... If not panel size we can fab one separate board with half-cut hole"). I think separate PCBs will be too small to assemble. Other PCB manufacturers have been able to panelise these boards for me in the past - the image shows part of the panel, with supporting areas, slots and "mouse-bite" break-off zones. They made the panel from the Gerber files I supplied. (1) Can you confirm that your PCB manufacturing service is unable to do this kind of panel? (2) Is there any feature within EasyEDA that would allow me to design the panel myself? I started looking at the idea of saving the PCB as a module, but that did not look promising. (3) Are you aware of third-party Gerber file editors that could be used to make a panel? #PCB#
acutetech 2017-09-26 17:40:37 comment 0 0 Circuit Design
Components lost from PCB layout
BUG Components lost from PCB layout Concise problem statement: All of the components from a PCB layout file are lost when opening the file. Tracks, board outline, added text etc remain. The "Components" list in the Design menu is empty. Steps to reproduce bug: Unsure. It has happened twice today, on the same design. The first time the three components on the bottom side were missing - I guessed I might have removed them by accident, so I re-added them using the "update PCB" command in the schematic viewer, and re-postioned them. Then to double-check I re-ran the "update PCB" command again. This time all of the components were added (top and bottom), outside the PCB footprint. I had to manually re-position all of the components, recreate the gerber files etc. Fortunately I saved the schematic and artwork files locally, as .json files, using the "Easyeda source" command. Then I closed and re-opened the browser and this time ALL of the components were missing, on one of my two projects. I created a new project and imported the saved .json files using the Open EasyEDA file command. The components were present and the "update PCB" command showed the artwork was in sync with the schematics. I think (though I am not certain) that the three components on the bottom of this new project then vanished again. However they are there now. If I was asked to explain this I would speculate that the save of the file to the server did not complete, so when I re-loaded the file I got a truncated file with the components missing. Or similar. Can this happen? Is there integrity checking of files as they move in both directions? Results: Expected results: Browser: Firefox. #BugReports#
acutetech 2017-09-20 21:34:47 comment 2 0 Bug Reports
How to create assembly drawings?
I can see the discussion here: https://easyeda.com/forum/topic/Exporting_with_assembly_drawing_causes_missing_traces_on_layers-PGqWsmga4 But I can't see how to repeat this: i.e. to see the silk screen plus pads only. Could you provide a step-by-step description? Is there already a tutorial on assembly drawings? Even if I can replicate this example it is probably not what I want. I need an assembly drawing separate from the silk screen. I can see how to turn on the "TopAssembly" layer and I can draw on that manually (adding "Tracks" to create component outline and "text" to add the component idents). What would be perfect would be to copy the silk screen layer onto the TopAssembly layer then edit the TopAssembly layer. Is there a way to do that? If I try copy and paste I get the whole component copied... Thanks - Charles #PCB#
acutetech 2017-09-19 18:19:34 comment 3 0 Circuit Design