[Solved] Exposed Copper inside Circular Pad
I created a footprint only composed of pads. The pads were converted from circular-shaped tracks. The 3D preview looks like what I am expecting, but the 2D preview shows that the inner part of the pads will expose the copper (after creation of the copper area). I was not able to reproduce the problem with only one circular pad, so I don't know what I've done wrong here. :/ Here is a public project showing the problem: https://easyeda.com/bencfd/exposed-copper Any help will be greatly appreciated. Thank you in advance. #Skill#
Unable to connect ratlines from repeated symbols
I created a symbol to repeat it multiple times on a schematic, as advised in the documentation (https://docs.easyeda.com/en/Schematic/Wiring-Tools/index.html). The pins of the symbol and of its footprint are properly matched together, thanks to the Footprint Manager. After converting the schematic to a PCB, ratlines appear between repeated elements, as expected from the schematic, but I am not able to connect them with a wire. When checking for design rules, I get the following error: The clearance between two objects is less than the Design Rule Checking clearance which has different nets. I assume the reason is that the symbol itself only consists of wires (tracks). But what would be the recommended way to repeat the same element on a board in this case? This public project is a simple example with two repeated elements: https://easyeda.com/bencfd/first-project The wire I am not able to draw in particular is the one I marked with a red arrow on the schematic. I am grateful to any hint you can provide to me. Thank you! #PCB#