Color silkscreen
Do you offer color silkscreen or inkjet printed boards? Something allowing color image to become top of board? #FeatureRequests#
Smart router
Would like to see the autorouter able to learn from iterations. Also, able to set a minimum feedthrough spacing from a pad. #FeatureRequests#
bug or feature?
BUG Here is the board. It is a common array of 28 pin jedec devices. This sort of chvron layout is trivial to execute with tape and mylar, yet the autorouter seems to have no awareness of how to identify these layouts or to route them optimally. This board is proving very tedious to get through the autrouter, and it is a 4 layer board. I do not know if this is a bug or a feature request. https://easyeda.com/editor#id=b783012708f34d248ff53d97a9cdff60|3232f00ed270489fa73a68305cd4c37d|329c2fb8d3574840a4ac996b137bf6e7 Browser: FF #BugReports#
no correct 74(hc,ahct,ks)138 part routes correctly.
BUG Concise problem statement: When laying out a 4 layer board, one plane VCC and the other plane GND, autoroute is assigning VCC to the bottom layer and assigns both capacitor terminals to GND. I just discovered this and am in the process of manually reassigning one terminal of caps to VCC, but this does not correct the problem of board fill assigning all flood areas to VCC in the bottom layer (should be GND). Steps to reproduce bug: choose any 75hc, ahct, ks138 from parts list. Draw schematic assigning them. export to new board note how ratlines do not show for these devices, and no ratlines are shown. The part presently has the inputs unassigned, but the select outputs do not show the nets created in the schematic. Results: Planes are correctly assigned, outer layers are flood fill with GND, and Expected results: a 74-something138 DIP part that has correct footprint. I tried using footprint editor; it shows correctly in the window, but refuses to route. Browser: #BugReports#
SVG board import?
There is an svg board export. Is there a way to manually edit the autofill settings to eliminate islands especially between adjacent pins? Or to edit the points of the autofill area? #FeatureRequests#
Server is bust, please try again later
It seems we have moved full circle, from timeshare mainframes to pcs and back now to competing for time on an overtaxed server. Is anything being done about this? I get that message about 90% of the time I click autoroute. #BugReports#
autoroute unable to route parts
BUG Concise problem statement: Autoroute times out after changing parts to new footprint Steps to reproduce bug: Load project https://easyeda.com/boxxofrobots/New_Project-5828cd40bdf748ee98de0c00a8528b95 See how relatively simple it is Observe how it refuses to route signal pins and times out when routing IC1 and IC2 Results: Expected results: A routed board Browser: Ubuntu/Firefox #BugReports#
Autoroute cannot complete 84-90%
This is my project. https://easyeda.com/boxxofrobots/New_Project-5828cd40bdf748ee98de0c00a8528b95 I cannot seem to get this to complete no matter what. It's a pretty simple board and yet, even after relocating the parts dozens of times and even making it 4 layers, the autorouter seems to get tied up at the same place - laying out traces for a user contributed part, IC1. Can anyone tell me what I am doing wrong, or is there something wrong with the part spec? It has a schematic symbol and footprint, but the router simply refuses to get past laying out the surrounding circuitry. Often it gets hung up running the same trace over and over. #PCB#
Which is the correct pinout of con2?
According to the website, con2 bonds out i2c, but according to the schematic those pins bond out USB and audio. Which is correct? #PCB#
copper pour does not add feedthroughs to GND net, and routes around them
As you can see, pour seems to work with SOME of the GND nodes (the pins on connector) but does not add feedthroughs to SMDs with connections to that same net AND when I add a feedthrough it routes the pour around them. Why? #PCB#