asdasdasd
EasyEDA Pro - Multipart Component Option Missing
Hi all! I'm trying to create a multipart component in EasyEDA Pro. I was trying to follow the documentation here. However, it shows a Part tab in the left pane. Unfortunately, I don't have that tab, only Property, Pin, and Wizard: Any hints here? #Schematic#
bryan costanich 2025-06-21 04:34:29 comment 6 0 Circuit Design
Holes - Not slot regions
EasyEDA Pro got rid of the hole tool. The advice I've read is to use slot regions. But circular slot regions don't show up on the drill gerber like holes would. Are circular slots really the way to go here? #PCB#
bryan costanich 2025-04-17 00:52:45 comment 6 0 Circuit Design
Upgraded EasyEDA Pro and lots of work has been lost
I've been working on a huge project in EasyEDA Pro. Multiple PCBs, lots of schematic pages. I upgraded to Easy EDA pro 2.2.34.8 from like 2.2.2x and all of a sudden, none of my work new work is there. In the prior edition, I had versioned and added the new versions into the project (restore into existing project) and renamed them as like `[name]_v1.x` or whatever because the versioning system functionality was still in flight. However, today, after upgrading, I opened my proejct, and only the original version is in there. I restored from a recent backup to a new project and even that version is missing the additional work. If I can't get that work back, I've lost like 100hrs or more of work. Any ideas here? #Others#
bryan costanich 2025-01-17 02:17:15 comment 3 1 Others
EasyEDA Pro - Common Library is pretty sparse compared to Std, are you going to expand?
I've been trying to use EasyEDA Pro, and I've noticed that the common library is a fraction of what the common library is in EasyEDA Std. Notable things missing: * US Symbols - Only EU style symbols for resistors?? * Larger Sizes - No 1210 caps? 0805 is the biggest size? Weird. * Terminal Blocks - Only imperial (inch) sizes, not metric? I'm sure there are a pile of other things missing, but that's the first few things I hit as I was trying to do a new schematic. Are you gyze going to expand this to include the same stuff that was in standard? It's pretty useless right now. #Schematic#
bryan costanich 2024-11-14 03:21:29 comment 11 1 Circuit Design
What's the best way to handle multi-board designs in EasyEDA PRO?
Hi folks! I'm working on a design that has (3), stacked PCB boards in a single project. I've gone through google and read all the docs, but most of the guidance is for EasyEDA STD and Pro has significantly changed the way projects, schematics, and boards are managed. So my question is this, what's the best way to handle this? Should I make (3) different pages on one schematic? Should I make (3) schematics? Each board will be connected to each other, so they're going to share NET names and I would like to be able to handle them as one single design. Also, should I create (3) different PCB designs, and can I share the schematics across them, or what? Potentially, one of the boards will have a different stack up (more power, so thicker copper pour), but the other two PCBs will share the same stackup. #Others#
bryan costanich 2024-11-12 03:25:56 comment 7 1 Others
EasyEDA Pro - How to draw board outline, line - not Polygon?
How do you draw just regular lines for a board outline in the latest Easy EDA Pro? If I try to draw just a wire/line like we used to be able to, it'll change the layer to one of the signal layers, not the board outline. and if i draw a polyline, it wants to close it: as you can see, i can't use poly line because i have arc corners. so I just need a regular old line. did they get rid of this feature?? #PCB#
bryan costanich 2024-11-08 04:46:37 comment 7 0 Circuit Design
BUG REPORT - Easy EDA Pro - Keyboard shortcuts no longer work on mac.
I just upgraded to Easy EDA Pro Version 2.2.30.6 (2.2.30.6) and keyboard shortcuts no longer work in the PCB editor. For instance, if I hit `W` for wire/route, it does nothing. I have to manually select the tool icon in the toolbar. If I hit `V` for via while routing, it just brings up the context menu: #PCB#
bryan costanich 2024-11-05 04:57:56 comment 10 0 Circuit Design
BUG REPORT - EasyEDA Pro, Snap does not align to origin
I just upgraded to Easy EDA Pro Version 2.2.30.6 (2.2.30.6), and I've got the following grid & snap settings: But Snap does NOT align to the grid. it's like the origin has been offset by 0.1mm or something. Note how it's just offset from the grid: #PCB#
bryan costanich 2024-11-05 04:39:01 comment 14 0 Circuit Design
BUG REPORT - Rendering in latest EasyEDA Pro looks terrible on high definition Mac displays
I recently updated my EasyEDA Pro on my mac and now the PCB editor rendering is potato quality: Looks like absolute garbage. Not sure what version I had installed prior to this one, but the rendering did not look like this, this is almost unusable. #PCB#
bryan costanich 2024-11-05 04:28:32 comment 11 0 Circuit Design
EasyEDA Pro - Do not Add Into BOM removes connections
I'm using EasyEDA Pro, and I've got `No` checked for "Add into BOM": But it does a strange thing to the component in the editor, it looks like all the connections are disabled if i do that: Is there a way to make sure the connections are still connected, even though it's not added into the BoM? In this case, that's a pre made PCIE M.2 connector. It's just PCB stuff, so there's no "component" per se. #Schematic#
bryan costanich 2024-11-05 04:22:08 comment 5 1 Circuit Design
Copper Area Clearance DRC Weirdness
Hey all! I'm getting this strange clearance DRC error: Here's my rule: Wonder if this is a bug? It looks fine to me. #PCB#
bryan costanich 2024-09-05 01:23:58 comment 3 0 Circuit Design
Why does this part have two footprints?
Hi all! I'm using this EG2X-GL multi-part: in my schematic i have both symbol parts: but when i new'd up a PCB, it added two footprints for it: i'm not sure what i've done wrong in the symbol creation. each sub part has to have a footprint associated with it, so it can align the pins in each sub part to the footprint: I thought maybe i needed to remove it from the main symbol (EG2X-GL as opposed to EG2X-GL.1/.2) but then i got errors. what am i doing wrong here? Thanks! #PCB#
bryan costanich 2023-06-02 06:23:59 comment 3 0 Circuit Design
Endless "Building Copper Area" Loop on panels
On panelized PCBs, I often get an endless loop when trying to rebuild the copper area: Anyone else get this and know how to fix it? I suspect it has something to do with my mouse bites, it's like it doesn't know how to resolve what's inside the board outline and what's not: #PCB#
bryan costanich 2023-05-04 12:31:39 comment 12 0 Circuit Design
PnP File Output with wrong coordinates
Hey folks! We got a CharmHigh Pick-and-Place machine and we've largely got it working (yay!)\, but it's been putting components in the wrong place. After much debugging\, it looks like EasyEDA is outputting the wrong coordinates for components. Check out `C2` here: Has anyone seen this? #PCB#
bryan costanich 2022-06-04 02:03:41 comment 2 0 Circuit Design
Clone Project not working
I've cloned a project, changed the name in the clone dialog box, but it doesn't show up in the project list. I've refreshed the project list and even closed and reopened EasyEDA. Is there something else I need to do, @usersupport? EDIT: It seems to work in the online editor but not the desktop version, so this looks like a bug. #BugReports#
bryan costanich 2022-05-27 03:29:04 comment 3 0 Bug Reports
Why doesn't a `GND` copper pour on middle layers connect to these `GND` multi-layer pads?
Hi folks, I have these castellations i've created, and on the top and bottom layers, copper pours will connect appropriately, however, when in a middle layer, the pour won't connect: Note the green there is a GND pour. however, on the bottom layer, a GND pour connects as expected: #PCB#
bryan costanich 2022-04-11 07:32:17 comment 3 0 Circuit Design
Why these weird past mask cutouts in the common 0603 resistor layouts?
When you use the 0603 resistor from the "commonly library" (hhahaa... "commonly" :D), there are these weird paste mask cutouts. why? #PCB#
bryan costanich 2022-04-02 18:38:08 comment 3 0 Circuit Design
Full Paste Mask on Pad
Hi folks! I've made a footprint for header castellations and I'd like to make sure there's no solder paste put on the top pad: How do I do that in the EasyEda footprint editor? #PCB#
bryan costanich 2022-04-02 17:57:31 comment 3 0 Circuit Design
What's the correct way to share pins on a symbol/footprint and have them connected electrically?
Hey folks, I have the following symbol/footprint combo: Note that pin 6 is actually many pins. They're connected together on the part themselves, so they don't need to be connected on the footprint. So i need to use as in the following: But that leaves me with the following ratlines: What's the correct way to set that up? #Schematic#
bryan costanich 2021-09-17 14:12:22 comment 7 0 Circuit Design
UserSupport: Please prioritize the fix the Add Vias feature
Dear @UserSupport, please fix this issue. The workaround there is confusing and a little onerous, but works if you're only adding vias to one net, e.g. GND vias. But if you need to do both power and GND, then it becomes even harder. Just my vote, but I really think this bug should be prioritized. #PCB#
bryan costanich 2021-09-17 05:55:24 comment 6 0 Circuit Design
"No Solid" keep-out on ALL layers?
Hey folks, I need to add a keepout on all layers for a symbol. I can't seem to make it work for more than a two-layer board, however, since you can't set a "no solid" area to "multi-layer". See this part. Note that at the bottom there is an antenna keep out, and it has two "no solid" rectangle regions set to "top layer," and "bottom layer" (silk screen hidden): But when i use it on a 4-layer board, the inner layers don't get kept out: Is there a way to fix this in the footprint rather than manually adding a keepout to my final PCB design? #PCB#
bryan costanich 2021-09-17 04:27:24 comment 28 0 Circuit Design
Setting Trace Space on Differential Pair Routing
Hey folks, I'm trying to route some diff pairs for ethernet and I need to set the trace space (the space in between the two pairs), but can't figure out how to do that. Is there a setting somewhere i'm missing? For that matter, I'd also like to set the trace width. It always defaults to 10mil. For context, as I understand it, the Ethernet pairs between the PHY and magnetics need to be impedance controlled to 100ohm and they need to be routed (ideally) in parallel, and the trace space and trace width are important variables in the impedance control. #PCB#
bryan costanich 2021-08-25 02:59:10 comment 11 0 Circuit Design
Non-exposed coper vias in footprints?
Hey folks, how do I create a via in a footprint? There is no 'via' tool in the footprint editor, only pads. But pads will leave exposed copper. Should I just set the solder mask to the radius of the pad or something? #PCB#
bryan costanich 2021-01-04 09:53:07 comment 33 0 Circuit Design
Symbol/Footprint preview not working in search?
For the last week or so, the preview hasn't been working for symbol/footprint search for me. It just spins: Anyone else seeing this? #GeneralDiscuss#
bryan costanich 2021-01-03 10:36:28 comment 9 0 Others
Weird Pad Behavior - Traces Not Connecting Properly
Hey folks, I'm laying out a PCB using this 13.56 MHz NFC antenna footprint: https://easyeda.com/components/13-56MHz-NFC-Antenna_a91e4959524c4400bf527e26e3e5bf4b and i'm getting a weird connectivity bug in when i try to lay a trace to it's pads. With one, the trace doesn't get clipped over the pad, and with the other, the trace won't connect: but in the part, the pads all look normal: any ideas? #PCB#
bryan costanich 2020-12-21 03:19:15 comment 8 0 Circuit Design